The Macally LampUSBCMAW LED table lamp is designed to provide light at your table, desk and nightstand while keeping your mobile devices fully charged. This clever lamp doubles as a charging station and features 2 USB ports with smart IC to charge smartphones, tablets, and all other USB powered devices at its fastest possible speed* (up to 2.4A).
The lamp has a built-in LED (3000K) with a long lifespan and better LED energy efficiency compared to traditional lighting solutions. This is important as we continue to become increasingly conscious of our ecological footprint. Fully certified, this LED table lamp charging station keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection.
Functional and stylish, the Macally LampUSBCMAW fits on any table, desk, nightstand, sideboard, etc. in any interior.
*Does not support Qualcomm Quick Charge.
Before installing the LampUSBCMAW make sure to remove the plastic film from the lamp shade.
Connect your smartphone, tablet and any other USB powered device into either of the 2 USB ports (5V/2.4A) with a USB-Lightning or USB-Micro USB cable (not included).
Controlling the LED lighting
To turn the lamp on, simply tap on the touch sensor once to turn it on at the dimmest level. Then tap on it again to cycle through the next 2 brightness levels and off.
• 1st tap: On/Dimmest
• 2nd tap: Medium brightness
• 3rd tap: Highest brightness
• 4th tap: Off
4 USB ports with Smart IC (2 x 2.1A, 2 x 1A) allows you to quickly and efficiently charge your iPad/tablet, iPhone/smartphone and any other USB powered mobile device.
This stylish white lamp matches any home or office interior. Thanks to its compact size, the Macally LAMPCHARGE fits in any small surface like a night stand. The LAMPCHARGE is a perfect household charging station as it allows all family members to charge their USB powered mobile devices in one central organized location.
The Macally LAMPCHARGEQI wireless charging LED table lamp is designed to provide light at your table, desk and nightstand while keeping your mobile devices fully charged.
This clever lamp doubles as a charger and features two separate ways to charge your mobile devices. You can easily charge your Qi-certified smartphone wirelessly (up to 10W) by placing it on the wireless charging pad on the wide base of the lamp. Wide enough to fit any plus size smartphone!
You can charge two devices at the same time at full capacity as it also has a USB port (5V, 2A) on the front side of the base to quickly charge your smartphone, tablet and any other USB powered device.
The lamp has a built-in LED (2700K) with a long lifespan and better LED energy efficiency compared to traditional lighting solutions. This is important as we continue to become increasingly conscious of our ecological footprint. Conveniently, you can dim the light to adjust it to your mood, from ambient light to direct light that brightens up your room!
Fully certified, this wireless charging LED table lamp keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection
The Macally LAMPCHARGESQ is a LED light charging station with a stylish wooden bottom finish. The built in LED light is touch controlled and offers a warm soft white light (2700K) -convenient for reading- and three stages of brightness (Dim, Mid and Bright). The 4 USB ports with Smart IC (5V/4.8A) allow you to quickly and efficiently charge your smartphone, tablet or any other USB powered device. Fully certified, it keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection. The Macally LAMPCHARGESQ is the perfect LED light charging station to put on a nightstand in your bedroom, a side table or side board in the living room or on a desk in your study or office.
The Macally cable box organizer is the perfect solution to keeping your power strips, surge protectors and cables in a neat convenient place. Just set your power strip or surge protector inside the box along with your peripheral power adapters, close the lid and you're done. With all cables neatly concealed and your power strip cable-spaghetti out of sight, the CABLEORGBOX will have the surrounding area looking clean and organized.
The Macally HMDTALL Ultrasonic Portable Cool Mist Humidifier provides quick relief from dry air making life pleasant for those with colds, allergies and dry skin. The space-saving design, with an easy-to-fill 200mL tank and LED lighting makes it ideal for use at work on your desk, or at home on your nightstand. It disperses a fine mist into the air, and is ultra-quiet making it ideal to have on while you sleep. The humidifier is also equipped “Anti-Dry technology” to prevent dry burning (turns off automatically when the water level is low) and an indicator light to let you know when it's time to refill the water tank.
FILLING THE TANK
*Do not use any aroma scented oils or liquids with this unit.
STARTING THE HUMIDIFIER
The humidifier has two missing options:
1. Continuous (default)
2. 3 second intervals
To start the humidifier connect the Micro USB end of the power cable to the back of the humidifier and the USB end to any USB power adapter (adapter not included)
Then press and release the action button to start the humidifier in continuous mode (default). To switch the mister to 3 second interval mode simply press and release the action button a second time and a 3rd time to turn it off.
Press and Release once
• First press - Start's continuous mist mode
• Second press - Changes the misting mode to 3 second intervals
• Third press - Turns the mist off
STARTING THE LED LIGHTING
The humidifier has two LED options:
1. Aurora (default)
To start the Aurora LED lighting effect simply press and hold the action button for 3 seconds until the light turns on. The LED lighting is set to Aurora mode by default.
To pause the Aurora effect and lock in the current lighting color simply press and hold the action button a second time and a 3rd time to turn it off.
Press and Hold for 3 Seconds
• First press - Turns the LED's on in Aurora mode
• Second press - Pauses the Aurora effect and locks in the current lighting color
• Third press - Turns the LED's off
REPLACING THE FILTER
Twist off the humidifier lid
Pull off the filter cover and take out the old filter.
*Note: There is spring located at the bottom of the filter cover. Please put it back in if it should fall out while replacing the filter.
Put the new filter into the filter opening of the humidifier lid, pop the filter cover back into place and reattach the humidifier lid.