14" Adjustable Car Suction Holder Mount for iPhone and Smartphone (MGRIP10)

Dual Position Car Seat Headrest Tablet Mount with Table Tray (HRMOUNTPROTRAY)

$ 49.99

The Macally HRMOUNTPROTRAY dual position car seat headrest tablet mount allows passengers to comfortably eat while watching movies on their tablet from the back seat of the car.

The headrest mount can be easily and securely attached to the car's front seat headrest posts with a width of 2” to 7¼”.  The cradle fits any tablet and mobile device with a width of 4.5” to 10”.

The strong aluminum frame can be extended so that the holder can be placed in the center (between the two front seats) so that all passengers can enjoy the same movie, at the same time. The cradle is fully adjustable and can rotate between portrait and landscape view.

The large 12.40" wide fold down table has a 3" wide cup holder (2.5" deep) and a raised lip to securely keep drinks and food in place while on the road.

FEATURES:

• Adjustable grip fits iPad, iPhone, tablet, Smartphone and any mobile device (with/without protective case) between 4.25” and 9.25” either long or wide
  
• Supports headrest posts between 2" and 7¼”
  
• Strong aluminum shaft can be extended to place the holder between the two front seats
  
• Soft holder grip to protect your iPad/iPhone/tablet/Smartphone from scratching
  
• Arm grip release button for an easy removal of your  iPad/iPhone/tablet/Smartphone
  
• Adjustable so that the back seat user can keep the tray leveled at all times.  Even with slightly reclined driver/passenger seats. 
  
• Easily folds upward and locks into place to keep the tray out of the way when not in use. 
  
• 12.40" (31.5 cm) x 5.6" (14.2 cm) wide table tray with a raised lip and a 3"/7.6 cm wide cup holder (2.5"/6.3 cm deep) to securely keep drinks and food in place
  

BENEFITS:

• Mounts your iPad/tablet and Smartphone securely to the car's headrest
  
• Supports headrest posts between 2" and 7.2" wide
  
• Strong aluminum shaft can be extended to place cradle holder between the two front seats
  
• Swivel ball-head to accommodate optimal viewing angles
  
• Cradle fits iPad/tablet and any other mobile device between 4.25” and 9.25” either long or wide.
  
• Soft grip pad and back support to protect your iPad/tablet from scratching.
  
• Quick rotation between portrait and landscape view
  
• Quick installation and dismounting, no tools required.
  
• Helps keep your automobile clean and organized.  Holds up to 5lbs.
  
• Multifunctional and easy to use.
  
• Securely keeps your passengers drink and food in place while on the road. 
  
• Easy to adjust so that the back seat user can keep the tray leveled while the front seat user has his/hers seat reclined. 
  

SET UP/INSTALLATION:

NOTE: The HRMOUNTPROTRAY is shipped so that it can be mounted on the back "passenger side" seat (extension arm pulling out from the left side). Please refer to the "Driver side seat mounting" section of this user's guide for steps on how to flip the table tray.

1. Loosen the head post clamps, place the clamps onto the headrest posts and then firmly tighten them into place by turning the clamp knobs.

2. Pull the tray downward and make adjustments to the tray angle by loosening and tightening the tray angle adjustment knob  as needed.

3. Attach the Smartphone/tablet cradle on to the cradle holder and then pull the cradle holder upward until it clicks securely into place.

4. Slide the cradle holder onto the mount until it clicks securely into place.
NOTE: You can place the holder either behind the seat or at the end of the aluminum frame so that the Smartphone/tablet is centered between the driver and passenger seats.

5. Push in the two arm-grip release buttons while pulling up on the top arm grip. Only pull out the top arm grip until the opening width between the top and bottom arm grips is about ½” shorter than the width or length of your tablet or phone to be held. You will use the spring-loaded arm grip as the main grip to securely hold your device into place.   Slide out the bottom arm grips for tablet.

6. Place your Smartphone/tablet onto the bottom arm grips, and pull the spring-loaded arm rip upward (you will feel the spring) to hold your tablet or phone securely.

DRIVER SIDE SEAT MOUNTING

These steps will guide you on how to flip the tray so that it can be mounted on the back of the driver side seat (extension arm pulling out from the right side).  Once completed please refer to step one of the "How to use the HRMOUNTPROTRAY" section of this users guide. 

1. Completely un-loosen the tray angle adjustment knob assembly and detach the tray from the HRMOUNTPRO.

2.  Re-attach the tray so that the extension arm pulls out from the right side and screw it back into place using the  angle adjustment knob. 

View full product details »

5" Adjustable Tri-Wing Car Cup Phone Holder With Cable Management Cradle (MCUP3WXL)

$ 29.99

The Macally MCUP3WXL car cup phone holder features a 5” flexible gooseneck and 360° rotatable cradle that allows you to achieve the best hands free viewing angles for your phone.

The 3 winged adjustable base is equipped with rubberized padded base arms to provide maximum friction when inside the cup holder and expands to accommodate small, medium and large cup holders between 2.6”and 4” wide.

Also, our phone cradle is uniquely designed with a one of a kind cable management clip to help keep your charging cables organized and at arm’s reach.

FEATURES:

• Adjustable cradle grips to accommodate any mobile device between 2" and 3.74" wide (with/without protective case)
  
• 3 winged adjustable rubberized padded base to accommodate cup holders between 2.6” and 4” wide
  
• 5” flexible gooseneck and 360° rotatable holder so you can achieve an optimal viewing angle
  
• Pull down cable management hanger to keep your charging cable in reach at all times
  
• Adjustable bottom phone support to ensure full access to your charging port and headphone jack
  
• Rubberized padded base arms to provide maximum friction when inside the cup holder. 
  

BENEFITS:

• ESSENTIAL CAR ACCESSORY: Distractions when driving are dangerous. Therefore, our cup holder phone mount will help you stay focused on the road by offering a convenient hands-free solution to display your phone safely and securely in your car.
  
• MAXIMUM ADJUSTABILITY: Designed with a 5” flexible gooseneck and a 360° cradle, you will have the ability to adjust your cup phone holder for car to any viewing angle you desire. This will allow you to safely view your phone during your commute.
  
• SECURE & DURABLE: With rubberized padded base arms to prevent mounting damage and adjustable cradle grips to compensate cup holders 2.6”-4” wide, the phone cup holder offers a strong grip & vibration free experience. 
  
• STAY ORGANIZED: Loose and tangled cables are a thing of the past when using our car cup phone holder. With a built in cable management hanger you will be able keep your charging cables organized and within arms reach.
  
• PERFECT FOR EVERY USER: We believe that you, the driver, should be comfortable and safe when behind the wheel. Therefore, our car phone cup holder accommodates any phone 2”-3.74” wide to allow for both iPhone and Android users to enjoy. 
  

INSTALLATION:

• Place the mCup3WXL into your cup holder and align the 3 wings so that they make full contact with the inside walls of your cup holder once expanded.
  
• Expand the base arms by turning the base expansion knob clockwise.  Then bend and make adjustments to the gooseneck as needed. 
  
• Press the cradle arm release button to expand the cradle arms, place your phone into the cradle and push the cradle arms inward to lock them in place. 
  
• To utilize the side cable management hanger, simply pull it downward and place your charging cable into the hanger. 
  

View full product details »

3-in-1 (ring, pop-stand, magnetic) Car Air Vent Phone Holder (mRingPopMag)

$ 29.99

The Macally 3-in-1 mRingPopMag is a one of a kind air vent holder that allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free.  The holder is uniquely designed to accommodate Pop-Stands, standard Ring cases and has a powerful magnet to securely hold any size Smartphone.  Once in place, the mRingPopMag allows you to effortlessly place and remove your phone in your car.  Drive safe with the Macally mRingPopMag.

FEATURES:

• 3-in-1 design to accommodate Pop-Stands, standard Ring cases and has a powerful magnet to securely hold any size Smartphone using the included metal plates
  
• Simple and stable design; Soft silicon clamp to mount the holder securely on most standard horizontal and vertical car air vents
  
• Magnetic mount securely holds any size Smartphone, also while in a protective case
  
• Easy to attach and detach so it can be moved between vehicles
  
• Rotatable vent clip to accommodate vertical and horizontal air vents
  

BENEFITS:

• Universal magnetic, Pop-Stand, Ring case phone holder for iPhone and android phones
  
• 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets
  
• Easy to use and sets up in seconds; mounts effortlessly to a vehicle’s air vent
  
• Allows for hands-free use with the Pop-Stands and Ring cases
  

SET UP/INSTALLATION:

POP STAND

1. Grasp the phone holder firmly and pull the front of the holder forward to expose the Pop-Stand slot
   
2. Make sure your Pop-Stand is fully expanded, slide it downward into the holder then push your phone inward towards the vent to tighten the hold
   

RING CASE

1. Flip the ring outward and slide it into the ring slot opening of the holder.
   

STANDARD MAGNET HOLDER

1. Remove the protective film from the back of the metal plate and stick it to the back of your Smartphone or case. NOTE: For Smartphone's equipped with wireless charging, we recommend placing the metal place on the lower half of the phone so that it does not interfere with the charging coil.
2. Phones without a case – Stick the metal plate directly onto the back of your phone.
   
3. Phones with a thin case – Place the metal plate between the phone and the case.
   
4. Phones with a thick case - If step#3 does not provide enough magnetic mounting force, you can stick the metal plate directly onto the back of the phone case.
5. Place the mobile device onto the magnet holder.
   

View full product details »