Car Vent Mount for iPhone/Smartphone (MVENTCLIP)

Car Vent Mount with Gravity Phone Holder (MVENTGRAVITY)

Sold Out - $ 29.99

The Macally MVENTGRAVITY is designed to allow one hand operation to mount your phone onto your car’s air vent. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The vent clamp can be easily and securely tightened in the air vent with the screw handle on the top. The supporting stand offloads the stress from the air vent and ensures a wide open vent for optimal air flow. The Macally MVENTGRAVITY offers many viewing angles and is perfect for navigation without obstructing your view while you drive! 

FEATURES:

• Fits any phone with the bulkiest case between 2.36" and 3.39" width, and up to 0.5" thickness
• Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone 
• Button to extend the cradle bottom support to accommodate taller phones
• Soft grip pad and back support to protect your mobile device from scratching
• Adjustable clamp to mount your phone securely on most standard horizontal and vertical air vents
• Swivel ball-head to accommodate optimal viewing angles
• Adjustable supporting stand for added mounting stability
• Quick rotation between portrait and landscape view

BENEFITS:

• Clampmount with tightening screw and supporting stand
• For iPhone/smartphone, also while in a case
• 360º rotatable viewing angle perfect for navigation use
• Wide viewing angles for driver or passenger

HOW TO USE:

Important note: Do NOT mount/unmount/adjust the Macally car phone mount while driving your car. Please pull over and come to a stop where it is safe to do so and does not impede traffic, and only then you can mount/unmount/adjust the Macally car phone mount.

1. Install the cradle on top of the base and slide down until it clicks and locks.
2. Find the desired location on the air vent in the dashboard of your car.
3. Insert the clamp to the air vent and tighten the screw handle clockwise to lock it securely into place. 
4. Press the supporting stand release buttons and swivel the stand until it seats on a surface to support the mount.
5. Place your phone on the cradle bottom support and push it downward to open the cradle grips.
6. When the cradle grips open wide enough, lay your phone onto the cradle back support.
7. Lift up your phone just a little bit to retract and fully close the grips to hold your phone securely.
8. If you have a large size phone (6.5-inch or longer), you may want to extend the cradle bottom support. In order to do this, press the release button and pull down the cradle bottom support to the desired length.
9. To adjust the viewing angle of the cradle, slightly unscrew the ball-head counterclockwise to loosen up the ball-head. 
10. Once you have found the desired viewing angle, turn the ball-head screw cap clockwise to tie the ball-head and cradle into place.
11. To change between vertical and horizontal views, just hold and turn the cradle with your phone.
12. To remove your phone from the cradle, press it downward and the grips will open.

View full product details »

Car Cup Holder Mount with Gravity Phone Holder (MCUPGRAVITY)

Sold Out - $ 29.99

The Macally MCUPGRAVITY is designed to allow one hand operation to mount your phone onto your car’s cup holder. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The soft cushioning on the holder provides a secure grip and protects your phone from scratches. The 6,3 cm (2,5") adjustable neck and 360-degree rotatable holder bring your phone within reach and offer the best viewing angle. Finally, the expendable base fits car cup holders with a width of 64 mm (2.5") to 101 mm (4"). The Macally MCUPGRAVITY is ideal for handsfree phone calls and for navigation without obstructing your view while you drive! 

FEATURES:

• Fits any phone with the bulkiest case between 2.36" and 3.39"/60 mm and 86 mm width, and up to 13 mm/0.5" thickness
• Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone 
• Button to extend the cradle bottom support to accommodate taller phones 
• Soft grip pad and back support to protect your phone from scratches
• Flexible neck and 360° rotatable holder to achieve an optimal viewing angle 
• Expandable base to fit car cup holders with a width of 2.5" to 4"

BENEFITS:

• Ideal single handed operation.  Free to use your other hand to grab keys, bags or drink when entering or exiting vehicle.
• Flexible design keeps your device within reach
• For iPhone/smartphone, also while in a case
• Push button to extend the bottom support
• Adjustable base for a secure fit in most cup holders

View full product details »

Black Dual Position Car Seat Headrest Mount (HRMOUNTPROB)

$ 29.99

Features

• Mounts your iPad/tablet securely to the car's headrest
• Supports headrest posts between 2"/5 cm and 7.2"/18.4 cm wide
• Strong aluminum shaft can be extended to place cradle holder between the two front seats
• Swivel ball-head to accommodate optimal viewing angles
• Cradle fits iPad/tablet and any other mobile device between 5"/12.7 cm to 10"/25.4 cm wide
• Soft grip pad and back support to protect your iPad/tablet from scratching
• Quick rotation between portrait and landscape view
• Quick installation and dismounting, no tools required
• Compatible with iPads/tablets and any other mobile devices up to 8 inches wide including: 

View full product details »