The Macally MVENTGRAVITY is designed to allow one hand operation to mount your phone onto your car’s air vent. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The vent clamp can be easily and securely tightened in the air vent with the screw handle on the top. The supporting stand offloads the stress from the air vent and ensures a wide open vent for optimal air flow. The Macally MVENTGRAVITY offers many viewing angles and is perfect for navigation without obstructing your view while you drive!
Important note: Do NOT mount/unmount/adjust the Macally car phone mount while driving your car. Please pull over and come to a stop where it is safe to do so and does not impede traffic, and only then you can mount/unmount/adjust the Macally car phone mount.
The Macally HRMOUNTPROTRAY dual position car seat headrest tablet mount allows passengers to comfortably eat while watching movies on their tablet from the back seat of the car.
The headrest mount can be easily and securely attached to the car's front seat headrest posts with a width of 2” to 7¼”. The cradle fits any tablet and mobile device with a width of 4.5” to 10”.
The strong aluminum frame can be extended so that the holder can be placed in the center (between the two front seats) so that all passengers can enjoy the same movie, at the same time. The cradle is fully adjustable and can rotate between portrait and landscape view.
The large 12.40" wide fold down table has a 3" wide cup holder (2.5" deep) and a raised lip to securely keep drinks and food in place while on the road.
NOTE: The HRMOUNTPROTRAY is shipped so that it can be mounted on the back "passenger side" seat (extension arm pulling out from the left side). Please refer to the "Driver side seat mounting" section of this user's guide for steps on how to flip the table tray.
1. Loosen the head post clamps, place the clamps onto the headrest posts and then firmly tighten them into place by turning the clamp knobs.
2. Pull the tray downward and make adjustments to the tray angle by loosening and tightening the tray angle adjustment knob as needed.
3. Attach the Smartphone/tablet cradle on to the cradle holder and then pull the cradle holder upward until it clicks securely into place.
4. Slide the cradle holder onto the mount until it clicks securely into place.
NOTE: You can place the holder either behind the seat or at the end of the aluminum frame so that the Smartphone/tablet is centered between the driver and passenger seats.
5. Push in the two arm-grip release buttons while pulling up on the top arm grip. Only pull out the top arm grip until the opening width between the top and bottom arm grips is about ½” shorter than the width or length of your tablet or phone to be held. You will use the spring-loaded arm grip as the main grip to securely hold your device into place. Slide out the bottom arm grips for tablet.
6. Place your Smartphone/tablet onto the bottom arm grips, and pull the spring-loaded arm rip upward (you will feel the spring) to hold your tablet or phone securely.
These steps will guide you on how to flip the tray so that it can be mounted on the back of the driver side seat (extension arm pulling out from the right side). Once completed please refer to step one of the "How to use the HRMOUNTPROTRAY" section of this users guide.
1. Completely un-loosen the tray angle adjustment knob assembly and detach the tray from the HRMOUNTPRO.
2. Re-attach the tray so that the extension arm pulls out from the right side and screw it back into place using the angle adjustment knob.
The Macally MCUP3WXL car cup phone holder features a 5” flexible gooseneck and 360° rotatable cradle that allows you to achieve the best hands free viewing angles for your phone.
The 3 winged adjustable base is equipped with rubberized padded base arms to provide maximum friction when inside the cup holder and expands to accommodate small, medium and large cup holders between 2.6”and 4” wide.
Also, our phone cradle is uniquely designed with a one of a kind cable management clip to help keep your charging cables organized and at arm’s reach.
The Macally 3-in-1 mRingPopMag is a one of a kind air vent holder that allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. The holder is uniquely designed to accommodate Pop-Stands, standard Ring cases and has a powerful magnet to securely hold any size Smartphone. Once in place, the mRingPopMag allows you to effortlessly place and remove your phone in your car. Drive safe with the Macally mRingPopMag.
STANDARD MAGNET HOLDER