- Continue Shopping
- Your Cart is Empty
Rechargeable Bluetooth Optical Mouse for Mac and PC (BTTOPBAT)
$ 24.99 & FREE shipping on orders over $75
The Macally BTTOPBAT is a rechargeable Bluetooth wireless optical mouse with a 800/1200/1600 DPI switch button, two soft-click buttons and scroll wheel/button for a precise and smooth control. The ergonomic and ambidextrous design offers maximum comfort to both left-handed and right-handed users and helps to increase productivity. The 300mAh built-in rechargeable battery will power the BTTOPBAT for up to 2-3 months before next charging is required.* No need to buy and replace batteries anymore! The BTTOPBAT works both with Mac and PC and doesn’t require any driver.
FEATURES:
- 800/1200/1600 DPI switch button to adjust sensitivity for more precise control
- Silent soft-click buttons and scroll wheel for silent and smooth control
- Stylish matte, slim and ambidextrous design
- Bluetooth wireless connectivity up to 10 m (30 ft)
- Built-in 300mAh rechargeable Lithium-Ion battery lasts up to 1-2 months of use (at 8 hours of daily use)*
- On/Off switch to save energy
SYSTEM REQUIREMENTS:
- Bluetooth enabled computer; Mac OS X 10.6 and later;
- Microsoft Windows 7/8/10;
- iOS/iPadOS 13.0 and later;
- Android 6.0 and later
SET UP INSTRUCTIONS:
The Macally BTTOPBAT does not require a driver, only a Bluetooth enabled computer with Mac OS X v10.6 and later or Microsoft Windows 7 / 8 / 10. Simply follow the steps below and you are ready to go!
Pairing the mouse with a Mac
- To connect the Bluetooth mouse to your computer, bring it within 1 ft /25 cm range from your computer.
- In your Mac, open ‘Bluetooth’ in ‘System preferences’. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold down the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- 'Bluetooth Mouse’ will appear in the list of Bluetooth Devices. Please click on ‘Connect’.
- When 'Bluetooth Mouse’ shows connected, you are ready to use the BTTOPBAT.
Pairing the mouse with Windows PC
- To connect the Bluetooth mouse to your computer, bring it within 1 ft/25 cm range from your computer.
- In your Windows PC, go to ‘Devices and Printers’ and select ‘Bluetooth Devices’. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold down the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- Click ‘Add a device’ at the top left corner.
- 'Bluetooth Mouse’ will appear, please select it and press ‘Next’.
- After a short period, Windows will show a screen indicating that the mouse is paired with the computer. You are ready to use the BTTOPBAT.
For pairing with iPhone/iPad or Android device please click here.
Related Items
LED Table Lamp with Qi Wireless Charging and USB Port (LAMPCHARGEQI)
Sold Out - $ 89.99
The Macally LAMPCHARGEQI wireless charging LED table lamp is designed to provide light at your table, desk and nightstand while keeping your mobile devices fully charged.
This clever lamp doubles as a charger and features two separate ways to charge your mobile devices. You can easily charge your Qi-certified smartphone wirelessly (up to 10W) by placing it on the wireless charging pad on the wide base of the lamp. Wide enough to fit any plus size smartphone!
You can charge two devices at the same time at full capacity as it also has a USB port (5V, 2A) on the front side of the base to quickly charge your smartphone, tablet and any other USB powered device.
The lamp has a built-in LED (2700K) with a long lifespan and better LED energy efficiency compared to traditional lighting solutions. This is important as we continue to become increasingly conscious of our ecological footprint. Conveniently, you can dim the light to adjust it to your mood, from ambient light to direct light that brightens up your room!
Fully certified, this wireless charging LED table lamp keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection
FEATURES:
- Conveniently charges two mobile devices at the same time to full capacity
- Dimmable LED
- 5.5" circular base to support just about any sized Smartphone
- USB port (5V, 2A) to quickly charge your smartphone, tablet and any other USB powered device
- Built-in LED (2700K) with a long lifespan and better LED energy efficiency than traditional lighting solutions
- Wireless charging pad to charge any Qi-enabled smartphone, up to 10W power output
- Stylish design to fit on any table, desk, nightstand, sideboard, etc. in any interior
- Includes LAMPCHARGEQI lamp base, lamp shade, AC adapter (100-240V, 50-60 Hz) with 5 ft/150 cm cable and user guide
- Color: Brushed metal / white lamp shade
- Dimensions: 17.25" (H) x 9.25" (W) x 9.25" (L)
- Weight: 2.30lbs
- Cable length: 6 ft
BENEFITS:
- NIGHTSTAND LIGHT CHARGING STATION | With two separate ways to recharge your electronic devices you'll be able to charge your Smartphone, tablet and any other Qi enabled or USB powered device quickly and safely
- 3-IN-1 DESIGN: Enjoy bedside charging and light while using only one outlet and reducing clutter on your nightstand, side table, desk or table
- MULTI-PRONG SAFETY CHECK: Keep your devices safe with surge protection, temperature control, short-circuit protection and over-current protection
- SMART LED BRIGHTNESS MEMORY: the smart LED brightness control allows you to set a desired brightness level and keep it that way when ever the lamp is turned off and on again.
SET UP/INSTALLATION:
- Before installing the LAMPCHARGEQI make sure to remove the plastic film from the lamp shade.
- Unscrew the lamp shade fastener, attach the lamp shade and screw the fastener back into place.
- Plug the power cable into the power port of LAMPCHARGEQI and the AC adapter into a wall outlet.
Wireless Charging
- Center and place your Qi-enabled smartphone on the wireless charging pad. Your smartphone will automatically charge.
- Note: If the battery of your smartphone is completely empty, it may take a few minutes before your smartphone starts charging.
USB Charging
- Connect your smartphone, tablet and any other USB powered device to the USB port (5V/2A) with a USB-Lightning or USB-Micro USB cable (not included)
Control the LED lighting
- Press and release the on/off button to turn the light on/off.
- Press and hold the on/off button to adjust the LED brightness.
Nightstand LED Light with 4 Port USB Charger (LAMPCHARGESQ)
Sold Out - $ 49.99
The Macally LAMPCHARGESQ is a LED light charging station with a stylish wooden bottom finish. The built in LED light is touch controlled and offers a warm soft white light (2700K) -convenient for reading- and three stages of brightness (Dim, Mid and Bright). The 4 USB ports with Smart IC (5V/4.8A) allow you to quickly and efficiently charge your smartphone, tablet or any other USB powered device. Fully certified, it keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection. The Macally LAMPCHARGESQ is the perfect LED light charging station to put on a nightstand in your bedroom, a side table or side board in the living room or on a desk in your study or office.
FEATURES:
- Nightstand LED light with USB charger, ideal to use as a night light and bed side charging station
- 4 Stage touch control: Dim, Mid, Bright, and OFF. Long Tap to turn Off
- 4 USB ports with Smart IC (5V/4.8A) to charge your smartphone, tablet and other USB powered device
- Compatible with a 100-240V AC input
- Includes LAMPCHARGESQ, 6 ft/180 cm AC power cable and user guide
BENEFITS:
- NIGHTSTAND LIGHT CHARGING STATION | With 4 USB ports with Smart IC (4 x 2.4A), you'll be able to charge your smartphone, tablet and and any other USB powered device quickly and safely
- TOUCH CONTROLLED | Simply tap the silver part on the light to turn it on and set the level of brightness to your personal preference.
- 3 LEVELS OF BRIGHTNESS: Create your perfect atmosphere with a 3 stage touch control: dim, mid, bright. Long tap to turn off cozy warm-white lighting (2700K).
- SMALL AND CONVENIENT: Enjoy bedside charging and light while using only one outlet and reducing clutter on your nightstand, side table, desk or table
- MULTI-PRONG SAFETY CHECK: Keep your devices safe with surge protection, temperature control, short-circuit protection and over-current protection
Dimmable Table Lamp with 4 USB Charging Ports (LAMPCHARGE)
$ 49.99
Touch control
The Macally LAMPCHARGE is touch controlled and provides three levels of brightness: Dim, Mid and Bright.
4 Port USB charger
4 USB ports with Smart IC (2 x 2.1A, 2 x 1A) allows you to quickly and efficiently charge your iPad/tablet, iPhone/smartphone and any other USB powered mobile device.
Stylish compact design
This stylish white lamp matches any home or office interior. Thanks to its compact size, the Macally LAMPCHARGE fits in any small surface like a night stand. The LAMPCHARGE is a perfect household charging station as it allows all family members to charge their USB powered mobile devices in one central organized location.
Features
- 4 Stage Touch control: Dim, Mid, Bright, and OFF. Long Tap to turn Off
- Cozy warm soft white light (2700K)
- Perfect to use as a night light and bed side charger
- One tap to light up the room just enough to see anytime throughout the night
- 4 USB ports (5V/4.8A) to charge all your USB-enabled devices
- Compatible with a 100-240V AC input
- Includes LAMPCHARGE, 6 ft/180 cm AC power cable (Type C, Europlug) and user guide
System requirements
- For table lamp function: 100-240V AC input
- For charge function: USB powered mobile device
Technical specifications
- Material: Metal mash, acrylic and ABS plastic
- Color: White, gray
- Dimensions: 116 (H) x 105 (W) x 105 (L) mm
- Weight: 278 g
- Cable length: 6 ft /180 cm
- AC input: 100-240V, 50-60 Hz
- USB output: 2 x DC 5V/1A, 2 x DC 5V/2.4A
- Lamp technology: LED
- Wattage lamp: 2 W
Package contents
- LAMPCHARGE, 6 ft/180 cm AC power cable with (Type C, Europlug), user guide