- Continue Shopping
- Your Cart is Empty
Car & Truck Accessories
3-in-1 (ring, pop-stand, magnetic) Car Air Vent Phone Holder (mRingPopMag)
$ 29.99
The Macally 3-in-1 mRingPopMag is a one of a kind air vent holder that allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. The holder is uniquely designed to accommodate Pop-Stands, standard Ring cases and has a powerful magnet to securely hold any size Smartphone. Once in place, the mRingPopMag allows you to effortlessly place and remove your phone in your car. Drive safe with the Macally mRingPopMag.
FEATURES:
- 3-in-1 design to accommodate Pop-Stands, standard Ring cases and has a powerful magnet to securely hold any size Smartphone using the included metal plates
- Simple and stable design; Soft silicon clamp to mount the holder securely on most standard horizontal and vertical car air vents
- Magnetic mount securely holds any size Smartphone, also while in a protective case
- Easy to attach and detach so it can be moved between vehicles
- Rotatable vent clip to accommodate vertical and horizontal air vents
BENEFITS:
- Universal magnetic, Pop-Stand, Ring case phone holder for iPhone and android phones
- 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets
- Easy to use and sets up in seconds; mounts effortlessly to a vehicle’s air vent
- Allows for hands-free use with the Pop-Stands and Ring cases
SET UP/INSTALLATION:
POP STAND
- Grasp the phone holder firmly and pull the front of the holder forward to expose the Pop-Stand slot
- Make sure your Pop-Stand is fully expanded, slide it downward into the holder then push your phone inward towards the vent to tighten the hold
RING CASE
- Flip the ring outward and slide it into the ring slot opening of the holder.
STANDARD MAGNET HOLDER
- Remove the protective film from the back of the metal plate and stick it to the back of your Smartphone or case. NOTE: For Smartphone's equipped with wireless charging, we recommend placing the metal place on the lower half of the phone so that it does not interfere with the charging coil.
-
Phones without a case – Stick the metal plate directly onto the back of your phone.
-
Phones with a thin case – Place the metal plate between the phone and the case.
- Phones with a thick case - If step#3 does not provide enough magnetic mounting force, you can stick the metal plate directly onto the back of the phone case.
- Place the mobile device onto the magnet holder.
Back Seat Tablet Holder and Organizer (HRTABLETORG)
$ 29.99
Keep the inside of your vehicle clean & organized with the Macally HRTABLETORG. The versatile back seat organizer is equipped with a large Slip-in tablet slot for hands free entertainment, 2 side drink pockets and a large top zipper pocket to help keep the inside of your car clean and clutter free.
FEATURES:
- Car back seat organizer with universal design to fit any car seat
- 2 water bottle side pouches
- 2 multipurpose hooks
- Large touch screen friendly tablet pocket supports Nintendo Switch, Apple iPad Pro, iPad and iPad mini and any tablet up to 10.5"
BENEFITS:
- Provides backseat passengers with hands free entertainment
- Keeps the inside of your car clean and organized
- Adjustable to fit trucks, cars, vans, SUV
- Convenient for travel, family road trips, carpooling, and more
- Will adhere to your seat and maintain its shape
SPECIFICATIONS:
- Material: 600D polyester
- Pocket: 3mm foam, PEVA water resistant lining
- Tablet holder: PVC 0.25mm thick (touch through)
- 2 Plastic hooks: holds up to 17lbs each
- 2 Mesh water bottle pockets : 3" x 6.3" inches
- Head rest strap (LxW): 19.7" x 1.0" inches
- Tablet holder dimension (LxW): 10.6" x 7.1" inches
- Pocket dimension (LxWxH): 12" x 10" x 3" inches
- Elastic strap hooks(LxW): 15.5" x 1.0" inches
- Weight: .1.3lbs
Car Dashboard Holder for Smartphones and GPS Units (MDASHCLAMP)
$ 29.99
The Macally mDashClamp keeps the drivers line of sight consistent with the road at all times. The flexible gel pad attaches to just about any smooth or textured dashboard and its stylish textured finish allows it to blend in nicely to your vehicles interior. This unique dashboard holder has a wide 4"/10 cm alligator style clamp and keeps your mobile device in place even during the sharpest turns.
FEATURES:
- Keeps the smartphone in clear line of sight and allows the driver to look at the phone screen while driving.
- Helps keep your eyes on the road to avoid accidents when driving.
- Large flexible gel pad helps keep your phone in place even during the sharpest turns.
- Keeps your phone within easy reach
- Works with phones that have bulky cases or protruding accessories
SET UP / INSTALLATION:
- Thoroughly clean and dry your dashboard.
- Find a visible and reachable place on your dashboard to place the holder then remove the transparent film from the gel pad and place the holder on your dashboard
- Press down on the clamp handle, place your mobile device into the bottom grip and slowly release the handle to bring the clamp back downward.
NOTES:
- Please make sure the surface is dry and dust free prior to removing the transparent film from the gel pad.
- Wash the gel pad with water and soap when needed to help rejuvenate the pad.
Adjustable Car Cup Holder Mount for Phone (MCUPPROSP)
$ 29.99
The Macally MCUPPROSP is a fully adjustable car cup mount that allows you to use your iPhone/smartphone for navigation and to entertain passengers. The holder fits any iPhone/smartphone, between 1.77" and 4.1" wide (with/without protective case). The soft cushioning on the holder provides a secure grip and protects your iPhone/smartphone from scratches. The Macally MCUPPROSP has an expendable base to fit car cup holders with a width of 3" to 4.1".
FEATURES:
- Adjustable grip fits iPhone, smartphone and any mobile device (with/without protective case) between 1.77 inches and 4.1 inches
- Soft holder grip to protect your iPhone/smartphone from scratching
- Arm grip release button
- Tiltable neck and 360-degree rotatable holder for the best viewing angle
- Expandable base from 3" to 4.1" which is a perfect fit in most car cup holders including large size ones
Adjustable Magnetic Car Dashboard Mount (MDASHMAGPRO)
$ 29.99
The Macally MDASHMAGPRO is a highly adjustable car dashboard mount with a magnetic smartphone holder that doesn’t obstruct your view while you drive. It mounts securely on your dashboard and allows you to do hands-free phone calls and use your smartphone as a navigator. The mount securely holds any size smartphone, with or without a protective case, with Neodymium magnets, which is 50% stronger than normal magnets. Drive safe with the Macally MDASHMAGPRO!
FEATURES:
- Dashboard mount offers the best viewing angle for navigation without blocking your driving view
- Mount securely to any type of dashboard with a large silicon gel pad and an additional 3M sticker, built to withstand extreme temperatures within -4º F and 176°F
- Drop-down adjustable arm to conform to various shapes and designs of dashboards
- Magnetic holder securely holds any size smartphone and most GPS, also while in a protective case
- 100% safe and reliable Neodymium magnet, 50% stronger than regular magnets
- Includes MDASHMAGPRO, two metal plates and user guide
BENEFITS:
- Rotate your smartphone and swivel your display as you please.
- 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets
- Easy to use and sets up in seconds; mounts effortlessly to a vehicle’s dashboard.
- Universal magnetic phone holder for iPhone and Android phones
- Swivel ball joint to accommodate optimal viewing angles
SET UP/INSTALLATION:
Car Vent Mount with Gravity Phone Holder (MVENTGRAVITY)
Sold Out - $ 29.99
The Macally MVENTGRAVITY is designed to allow one hand operation to mount your phone onto your car’s air vent. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The vent clamp can be easily and securely tightened in the air vent with the screw handle on the top. The supporting stand offloads the stress from the air vent and ensures a wide open vent for optimal air flow. The Macally MVENTGRAVITY offers many viewing angles and is perfect for navigation without obstructing your view while you drive!
FEATURES:
- Fits any phone with the bulkiest case between 2.36" and 3.39" width, and up to 0.5" thickness
- Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone
- Button to extend the cradle bottom support to accommodate taller phones
- Soft grip pad and back support to protect your mobile device from scratching
- Adjustable clamp to mount your phone securely on most standard horizontal and vertical air vents
- Swivel ball-head to accommodate optimal viewing angles
- Adjustable supporting stand for added mounting stability
- Quick rotation between portrait and landscape view
BENEFITS:
- Clampmount with tightening screw and supporting stand
- For iPhone/smartphone, also while in a case
- 360º rotatable viewing angle perfect for navigation use
- Wide viewing angles for driver or passenger
HOW TO USE:
Important note: Do NOT mount/unmount/adjust the Macally car phone mount while driving your car. Please pull over and come to a stop where it is safe to do so and does not impede traffic, and only then you can mount/unmount/adjust the Macally car phone mount.
- Install the cradle on top of the base and slide down until it clicks and locks.
- Find the desired location on the air vent in the dashboard of your car.
- Insert the clamp to the air vent and tighten the screw handle clockwise to lock it securely into place.
- Press the supporting stand release buttons and swivel the stand until it seats on a surface to support the mount.
- Place your phone on the cradle bottom support and push it downward to open the cradle grips.
- When the cradle grips open wide enough, lay your phone onto the cradle back support.
- Lift up your phone just a little bit to retract and fully close the grips to hold your phone securely.
- If you have a large size phone (6.5-inch or longer), you may want to extend the cradle bottom support. In order to do this, press the release button and pull down the cradle bottom support to the desired length.
- To adjust the viewing angle of the cradle, slightly unscrew the ball-head counterclockwise to loosen up the ball-head.
- Once you have found the desired viewing angle, turn the ball-head screw cap clockwise to tie the ball-head and cradle into place.
- To change between vertical and horizontal views, just hold and turn the cradle with your phone.
- To remove your phone from the cradle, press it downward and the grips will open.
Car Cup Holder Mount with Gravity Phone Holder (MCUPGRAVITY)
$ 29.99
The Macally MCUPGRAVITY is designed to allow one hand operation to mount your phone onto your car’s cup holder. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The soft cushioning on the holder provides a secure grip and protects your phone from scratches. The 6,3 cm (2,5") adjustable neck and 360-degree rotatable holder bring your phone within reach and offer the best viewing angle. Finally, the expendable base fits car cup holders with a width of 64 mm (2.5") to 101 mm (4"). The Macally MCUPGRAVITY is ideal for handsfree phone calls and for navigation without obstructing your view while you drive!
FEATURES:
- Fits any phone with the bulkiest case between 2.36" and 3.39"/60 mm and 86 mm width, and up to 13 mm/0.5" thickness
- Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone
- Button to extend the cradle bottom support to accommodate taller phones
- Soft grip pad and back support to protect your phone from scratches
- Flexible neck and 360° rotatable holder to achieve an optimal viewing angle
- Expandable base to fit car cup holders with a width of 2.5" to 4"
BENEFITS:
- Ideal single handed operation. Free to use your other hand to grab keys, bags or drink when entering or exiting vehicle.
- Flexible design keeps your device within reach
- For iPhone/smartphone, also while in a case
- Push button to extend the bottom support
- Adjustable base for a secure fit in most cup holders
Black Dual Position Car Seat Headrest Mount (HRMOUNTPROB)
$ 29.99
Features
- Mounts your iPad/tablet securely to the car's headrest
- Supports headrest posts between 2"/5 cm and 7.2"/18.4 cm wide
- Strong aluminum shaft can be extended to place cradle holder between the two front seats
- Swivel ball-head to accommodate optimal viewing angles
- Cradle fits iPad/tablet and any other mobile device between 5"/12.7 cm to 10"/25.4 cm wide
- Soft grip pad and back support to protect your iPad/tablet from scratching
- Quick rotation between portrait and landscape view
- Quick installation and dismounting, no tools required
- Compatible with iPads/tablets and any other mobile devices up to 8 inches wide including:
Acrylic Air Vent Magnetic Phone Holder (MVENTMAGICE)
$ 24.99
The Macally mVentMagIce allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. Once in place, the mVentMagIce allows you to effortlessly place and remove your phone in your car. The holder has a powerful magnet to securely hold any size iPhone/Smartphone, even while in a protective case and its crystal like acrylic finish adds an elegant appearance while in your vehicle.
FEATURES:
- Crystal like acrylic finish for an elegant appearance
- Simple and stable design. Easy to attach and detach so it can be moved between vehicles
- Magnetic mount securely holds any size Smartphone, also while in a protective case
- Swivel ball joint to accommodate optimal viewing angles
- Two metal plates
BENEFITS:
- Rotate your smartphone and swivel your display as you please.
- 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets
- Easy to use and sets up in seconds; mounts effortlessly to a vehicle’s air vent.
- Universal magnetic phone holder for iPhone and android phones
SET UP/INSTALLATION:
1. Remove the protective film from the back of the metal plate and stick it to the back of your Smartphone or case.
NOTE: For Smartphone's equipped with wireless charging, we recommend placing the metal place on the lower half of the phone so that it does not interfere with the charging coil.
1A. Phones without a case – Stick the metal plate directly onto the back of your phone.
1B. Phones with a thin case – Place the metal plate between the phone and the case.
1C. Phones with a thick case - If 1B does not provide enough magnetic mounting force, you can stick the metal plate directly onto the back of the phone case.
2. Find a visible and reachable location on your car’s air vent to attach the phone holder then place the forks into the air vent
3. Place your mobile device onto the magnet.
Headrest Hanger and Car Seat Filler Organizer - 2 Pack (HRHOOKNPOCKET)
$ 29.99
Keep your vehicle clean and organized with the Macally HRHOOKNPOCKET. The seat gap fillers block the gap between your car or truck seat and center console, helping to prevent items such as coins, keys, mobile phones, and other loose items from falling to the floor. The headrest hooks attach easily and effortlessly to your vehicle's headrest post so you can hang grocery bags, handbags, jackets, dry cleaning more conveniently.
FEATURES:
- 2-in-1 Car Seat Gap Filler & Organizer
- Fits most cars
- Universal Car Headrest Hooks
- Ultra-Durable Premium Construction
- Gorgeous PU Leather
- Contents: 2x Seat gap fillers (w/ pocket), 2x Headrest hangers
BENEFITS:
- 2 car headrest hooks so you can easily and effortlessly hang your purse or grocery bags
- Fast and easy to set up
- Blocks the gap between your seat and your center console in the car
- One size fits nearly all vehicles
- Keeps keys, money and other items from falling into the seat gap
SET UP/INSTALLATION:
- Pull the seat all the way back and place the gap fillers in-between the seat gap
- Place the hooks on the headrest post
8 Inch Super-Long Adjustable Car Cup Holder Mount with 21W USB Charger (MCUPPOWERTAB)
$ 39.99
The Macally MCUPPOWERTAB is an adjustable car cup holder mount for iPad/iPhone/tablet/smartphone (with or without a protective case) between 4.25”and 9.25” either long or wide.
The Macally MCUPPOWERTAB has a spring-loaded adjustable grip and one-touch release buttons to easily remove the iPad/iPhone/tablet/smartphone from the holder. The soft cushioning on the holder provides extra grip and protects your iPad/iPhone/tablet/smartphone from scratches.
The Macally MCUPPOWERTAB has an 8” super-long flexible neck and a 360-degree rotatable holder for the best viewing angle. The adjustable base of the Macally MCUPPOWERTAB fits perfectly in the cup holder of most cars.
As the name suggests, the MCUPPOWERTAB has two USB ports (2 x 5V/2.1A) to charge two mobile devices simultaneously, as well as two cigarette lighter sockets to charge other devices. The Macally MCUPPOWERTAB is compatible with a 12-24V car power input.
FEATURES:
- Adjustable grip fits iPad, iPhone, tablet, smartphone and any mobile device (with/without protective case) between 4.25” and 9.25” either long or wide
- Supports larger size iPad Pro and tablet up to 13" display
- Soft holder grip to protect your iPad/iPhone/tablet/smartphone from scratching
- Arm grip release button for an easy removal of your iPad/iPhone/tablet/smartphone
- 8"/20 cm super-long flexible neck and 360-degree rotatable holder for the best viewing angle
- Adjustable base for a perfect fit in most car cup holders
- Built-in 21Watt USB charger (2 x 2.1A, 5V) to quickly charge any combination of two iPads, iPhones, iPods, smartphones, tablets or other USB-powered devices simultaneously
- 2 additional cigarette lighter sockets to charge other devices
- Compatible with a 12-24V car cigarette lighter socket
Magnetic Suction Cup Phone Mount with Telescopic Arm for iPhone/smartphone (TELEMAG2)
$ 29.99
The Macally TELEMAG2 is a suction cup phone mount with an extendable telescopic arm and a magnetic holder that allows you to use your iPhone/smartphone for hands-free phone calls and GPS car navigation.
The TELEMAG2 not only mounts securely to the windshield, but also to the dashboard, with the included dashboard mount disk base. The big advantage of the use as a dashboard mount is that it doesn't obstruct your view while you drive.
The Macally TELEMAG2 has a telescopic arm that extends up to a length of 5 inches to bring your iPhone/smartphone within close viewing distance. The holder has a 100% safe and 50% more powerful Neodymium magnet to securely hold any size iPhone/smartphone, even while in a protective case. Drive safe with the Macally TELEMAG2!
FEATURES:
- Supreme suction cup for strong and durable adhesion to windshield and dashboard
- Maximum adhesion to dashboard with the included suction mount base disc
- Strong telescopic arm extends up to 5 inches to bring iPhone/smartphone within close viewing distance
- 100% safe** and reliable Neodymium magnet, 50% stronger than regular magnets
- 360° rotation for the best viewing angle
BENEFITS:
- Extendable arms brings the phone closer to you for easier reach
- Adjustable feet that keep your mobile device in place
- Includes dashboard pad that securely holds onto the most porous of surfaces
- Comes with 2 different metal plates: rectangle, circle, diamond, & heart
Suction Cup Phone Mount with Telescopic Arm for iPhone/smartphone (TELEHOLDER2)
$ 29.99
The Macally TELEHOLDER2 is a suction cup phone mount with an extendable telescopic arm and a universal holder that allows you to use your iPhone/smartphone for hands-free phone calls and GPS car navigation.
The TELEHOLDER2 not only mounts securely to the windshield, but also to the dashboard, with the included dashboard mount disk base. The big advantage of the use as a dashboard mount is that it doesn't obstruct your view while you drive.
The Macally TELEHOLDER2 has a telescopic arm that extends up to a length of 5 inches to bring your iPhone/smartphone within close viewing distance. The holder supports iPhone/smartphone with a width of 1.97”o 4.5”. Drive safe with the Macally TELEHOLDER2!
FEATURES:
- Supreme suction cup for strong and durable adhesion to windshield and dashboard
- Maximum adhesion to textured dashboard with the included suction mount base disc
- Strong telescopic arm extends up to 5 in to bring iPhone/smartphone within close viewing distance
- Adjustable grip fits iPhone/smartphone with or without a protection case between 1.97 to 4.5 in
- 360° rotation for the best viewing angle
BENEFITS:
- Extendable arms brings the phone closer to you for easier reach
- Adjustable feet that keep your mobile device in place and won't block any ports
- One handed attachement and removal
- Includes dashboard pad that securely holds onto the most porous of surfaces
Magnetic Car Air Vent Phone Mount, 2-Pack (VENTFORKMAG)
$ 29.99
The Macally VENTFORKMAG allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. Once in place, the VENTFORKMAG allows you to effortlessly place and remove your phone in your car. The holder has a powerful magnet to securely hold any size iPhone/Smartphone, even while in a protective case. Drive safe with the Macally VENTFORKMAG.
FEATURES:
- Simple and stable design; Slips right onto the air vent
- Magnetic mount securely holds any size iPhone/Smartphone, also while in a protective case
- Easy to attach and detach so it can be moved between vehicles
PACKAGE CONTENTS:
- 2 VENTFORKMAG, 4 metal plates and user guide
Magnetic Air Vent Car Cell Phone Holder (VENTMAGFLEX)
$ 24.99
The Macally VENTMAGFLEX allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. Once in place, the VENTMAGFLEX allows you to effortlessly place and remove your phone in your car. The holder has a powerful magnet to securely hold any size iPhone/Smartphone, even while in a protective case. Drive safe with the Macally VENTMAGFLEX.
FEATURES:
- Simple and stable design; Slips right onto the air vent
- Magnetic mount securely holds any size iPhone/Smartphone, also while in a protective case
- Easy to attach and detach so it can be moved between vehicles
- Swivel ball joint to accommodate optimal viewing angles
BENEFITS:
- Rotate your smartphone and swivel your display as you please.
- 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets.
- Easy to use and sets up in seconds; mounts effortlessly to a vehicle’s air vent.
- Universal magnetic phone holder for iPhone and android phones
SET UP/INSTALLATION:
1. Remove the protective film from the back of the metal plate and stick it to the back of your Smartphone or case.
NOTE: For Smartphone's equipped with wireless charging, we recommend placing the metal place on the lower half of the phone so that it does not interfere with the charging coil.
1A. Phones without a case – Stick the metal plate directly onto the back of your phone.
1B. Phones with a thin case – Place the metal plate between the phone and the case.
1C. Phones with a thick case - If 1B does not
provide enough magnetic mounting force, you can stick the metal plate directly onto the back of the phone case.
2. Find a visible and reachable location on any of your car’s air vent to attach the
phone holder then place the forks into the air vent
3. Loosen and tighten the ball joint to adjust the angle as needed.
4. Place mobile device onto the magnet.
NOTES:
* For the mount to be able to hold the iPhone/smartphone it is required to attach the included metal plate to the iPhone/smartphone or its case. For cases with glossy/slippery finishes such as TPU cases, we recommend placing the metal plates on the outside of the case. Placing the plate inside the case will cause the magnetic hold to gradually slip during your drive.
** Do NOT use with iPod classic or any device with hard drive. The strong magnetic fields of the Neodymium magnet that is a part of this product can damage magnetic hard drives and other similar devices.
Macally Commercial-grade Car/Truck Seat Rail and Floor Mount for Tablet and Phone (CARFLOORMOUNT)
$ 39.99
The Macally CARFLOORMOUNT is a fully adjustable car seat rail and floor mount that allows you to use your iPad/tablet for navigation and to entertain passengers. The holder fits any iPad/tablet, and also iPhone/smartphone, between 3.5" and 8" wide (with/without protective case). The soft cushioning on the holder provides a secure grip and protects your iPad/tablet from scratches. The super-long 71 cm (28") adjustable neck and 360-degree rotatable holder bring your iPad/tablet within reach and offer the best viewing angle. The Macally CARFLOORMOUNT is ideal for cars, fleets, trucks, vans and service vehicles.
FEATURES:
- Designed for cars, fleets, trucks, vans and service vehicles
- Seat rail mount bracket, one for multiple angles
- Floor mount bracket and metal strap fastner
- Flexible neck and 360-degree rotatable holder for the best
- Soft holder grip to protect your device from scratching
- Fits iPad, iPhone, smartphone and mobile phone, also while
- Adjustable grip fits iPad, iPhone, tablet and smartphone with length or width between 3.5 inches and 8 inches
BENEFITS:
- Heavy duty metal pedestal mounting solution
- One hand mounting or unmounting of your tablet or smartphone
- Commericial or enterprise environment
- Great for personal or business use such as salesman, service professionals
- Does not obstruct passenger comfort
Car Vent Mount Holder with Wireless Qi Certified Charging for Smartphones (MVENTQI)
$ 59.99
The Macally MVENTQI works with most horizontal and vertical air vents, a built-in USB port or USB car charger and any Qi enabled smartphone between between 2.1" ~ 4.7", like iPhone XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9 and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35 ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc.
FEATURES:
- Optimized for wireless charging of all Qi enabled smartphones with a width between 2.1" ~ 4.7"
- Adjustable bottom phone stabilizer to correctly align your Qi enabled Smartphone charging coil position
- Up to a 40% faster charge than standard Qi wireless chargers (only applicable to wireless fast charge enabled smartphones) **Minimum 9V 2A Quick Charge adapter required
- Built in FOD (Foreign Object Detection) to prevent overheating and damage to your Qi enabled device.
- Car air vent mount holder offers the best viewing angle for navigation without blocking your driving view
- Patented vent clamp to mount your mobile device securely on most horizontal and vertical air vents
BENEFITS:
- Charges your Smartphone up to a 40% faster than standard Qi wireless chargers (requires a wireless fast charge enabled device)
- Keep your phone in one simple, easy to reach place while you drive
- Swivel ball joint to accommodate optimal viewing angles and 360° rotation
- Patented vent clamp to mount your mobile device securely on most horizontal and vertical air vents
SET UP/INSTALLATION:
- Find a visible and reachable location on any of your cars air vents to attach the phone holder.
- Insert the clamp into the air vent and tighten it securely into place by turning the screw handle clockwise.
- Press the support stand release buttons and swivel the stand until it sits on the surface of your vehicle to support the mount.
- Connect the USB-C end of the charging cable to the cradle and the other end into the USB-A port of your car or USB car charger.
- Press the holder grip and foot support release buttons on the back of the cradle to expand the arms and pull down the foot support.
- Place your smartphone in the holder and align the center of your smartphone with the triangle marks on the grips for best Qi charging efficieny.
- Push the foot support upward until the bottom of your smartphone rests on it.
- Press both holder grips inward until they hold the smartphone firmly. Your smaatphone will automatically start to charge.
- To obtain the most comfortable smartphone viewing positioning, simply bend the neck till you reach the desired viewing position.
- To switch between vertical and horizontal viewing angles, simply rotate the holder as needed.
NOTES:
Do not place any metallic objects on the Qi charger
Before charging, please remove any protective case with a ring, popsocket, credit card holder and any metal plate from your smartphone. Failing to do so can cause serious damage to your Smartphone and charger!
Wireless Qi Certified Charging Cup Holder Mount with Adjustable Neck for Smartphones (MCUPXLQI)
$ 59.99
Macally MCUPXLQI Car Cup Holder Mount With 4" Long Flexible Neck and Wireless Qi Charger for iPhone XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9 and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35 ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc.
FEATURES:
- Optimized for wireless charging of all Qi enabled smartphones with a width between 2.1" ~ 4.7".
- Adjustable bottom phone stabilizer to correctly align your Qi enabled Smartphone charging coil position.
- Up to a 40% faster charge than standard Qi wireless chargers (only applicable to wireless fast charge enabled smartphones) **Minimum 9V 2A Quick Charge adapter required
- Built in FOD (Foreign Object Detection) to prevent overheating and damage to your Qi enabled device.
- 4"/10 cm flexible neck and 360° rotatable holder to achieve an optimal viewing angle
BENEFITS:
- Charges your Smartphone up to a 40% faster than standard Qi wireless chargers (requires a wireless fast charge enabled device)
- Keep your phone in one simple, easy to reach place while you drive
- Universally compatible with all Qi enabled Smartphones with a width between 2.1" ~ 4.7"
- Rubber pad/spacers included to accommodate larger cup holders
SET UP/INSTALLATION:
- Attach the holder to the neck.
- Place the base into your car's cup holder and twist the screw knob until you reach a snug fit. Please be careful not to over tighten the screw knob.
- Connect the USB-C end of the charging cable to the cradle and the other end into the USB-A port of your car or USB car charger (not included).
- Press the holder grip/foot support release buttons on the back of the cradle to expand the arms and pull down the foot support.
- Use the included smartphone placement cards to adjust the foot support and properly align your smartphone's charging coil position.
- Place your smartphone in the holder and squeeze both grips inward until it holds the smartphone firmly. Your smartphone will automatically start to charge.
- To obtain the most comfortable smartphone viewing positioning, simply bend the neck till you reach the desired viewing position.
- To switch between vertical and horizontal viewing angles, simply rotate the holder as needed.
NOTES:
- Do not place any metallic objects on the Qi charger
- Before charging, please remove any protective case with a ring, popsocket, credit card holder and any metal plate from your smartphone. Failing to do so can cause serious damage to your Smartphone and charger!
Dual Fork Magnetic Air Vent Phone Mount (VENTSTRIPMAG)
$ 29.99
The Macally VENTSTRIPMAG allows you to keep your eyes on the road, your phone in view, and your calls 100% hands-free. Once in place, the VENTSTRIPMAG allows you to effortlessly place and remove your phone in your car. The holder has a powerful magnet to securely hold any size iPhone/Smartphone, even while in a protective case. Drive safe with the Macally VENTSTRIPMAG.
FEATURES:
- Simple and stable design; Slips right onto the air vent
- Magnetic mount securely holds any size iPhone/Smartphone, also while in a protective case
- Easy to attach and detach so it can be moved between vehicles
BENEFITS:
- 100% safe and reliable Neodymium magnet; 50% stronger than regular magnets
- Magnetic mount securely holds any size iPhone/Smartphone, also while in a protective case
- Simple and stable design; Slips right onto the air vent
SET UP/INSTALLATION:
1. Remove the protective film from the back of the metal plate and stick it to the back of your Smartphone or case.
NOTE: For Smartphone's equipped with wireless charging, we recommend placing the metal place on the lower half of the phone so that it does not interfere with the charging coil.
1A. Phones without a case – Stick the metal plate directly onto the back of your phone.
1B. Phones with a thin case – Place the metal plate between the phone and the case.
1C. Phones with a thick case - If 1B does not
provide enough magnetic mounting force, you can stick the metal plate directly onto the back of the phone case.
2. Find a visible and reachable location on any of your car’s air vent to attach the phone holder then place the forks into the air vent
3. Rotate the magnet holder if needed and place the mobile device onto the magnet holder.
Multifunction Cool Mist Humidifier with USB Fan and LED light attachments (HMDUSB)
Sold Out - $ 29.99
The Macally HMDUSB Multifunction Ultrasonic Cool Mist Humidifier provides quick relief from dry air making life pleasant for those with colds, allergies and dry skin. The space-saving design, with an easy-to-fill 240mL tank and USB attachments (LED night light and Fan) makes it ideal for use at work on your desk, or at home on your nightstand. It disperses a fine mist into the air, and is ultra-quiet making it ideal to have on while you sleep. The humidifier is also equipped “Anti-Dry technology” to prevent dry burning (turns off automatically when the water level is low) and an indicator light to let you know when it's time to refill the water tank.
FEATURES:
- Anti-Dry technology to prevent "dry burning"; Automatically shuts off when the water level becomes low.
- Replaceable water filters to freshen your space with pure, clean moisture
- 2 misting settings (Continuous/4hr timer and 3 sec interval/8hr timer) with preset timers for extra added peace of mind while in use.
- Designed to operate quietly for uninterrupted work or sleep
- 7 LED lighting colors to meet your personal preference
- USB night light attachment
- USB fan attachment to help redirect mist and keep you cool when needed.
BENEFITS:
- Small and compact; Doesn’t take up much space
- Helps relieve dry, itchy skin by ensuring your area remains at a comfortable humidity level.
- Additional filter included
- Preset misting timers (Continuous/4hr timer and 3 sec interval/8hr timer) for extra added peace of mind while in use.
- Mist-Proof USB night light attachment.
- Mist-Proof soft silicone USB fan attachment to help redirect mist where needed.
SET UP/INSTALLATION:
Press and Release once
- First press - Start's continuous mist mode / 4 hr timer (default)
- Second press - Changes the misting mode to 3 second intervals / 8 hr timer
- Third press - Turns the mist off
Press and Hold for 3 Seconds
- First press - Turns the LED's on in Aurora mode
- Second press - Pauses the Aurora effect and locks in the current lighting color
- Third press - Turns the LED's off
- NOTE: The action button does not control the top USB Attachment Port.
FILLING THE TANK
- Twist off the humidifier lid
- Fill the tank with water
- Put the lid back on
*Do not use any aroma scented oils or liquids with this unit.
STARTING THE HUMIDIFIER
The humidifier has two missing options:
1. Continuous / 4 hr timer (default)
2. 3 second intervals / 8 hr timer
To start the humidifier connect the Micro USB end of the power cable to the back of the humidifier and the USB end to any USB power adapter (adapter not included)
Then press and release the action button to start the humidifier in continuous mode (default). To switch the mister to 3 second interval mode simply press and release the action button a second time and a 3rd time to turn it off.
Press and Release once
• First press - Continuous / 4 hr timer (default)
• Second press - Changes the misting mode to 3 second intervals / 8 hr timer
• Third press - Turns the mist off
STARTING THE LED LIGHTING
The humidifier has two LED options:
1. Aurora (default)
2. Solid
To start the Aurora LED lighting effect simply press and hold the power button for 3 seconds until the light turns on. The LED lighting is set to Aurora mode by default.
To pause the Aurora effect and lock in the current lighting color simply press and hold the action button a second time and a 3rd time to turn it off.
Press and Hold for 3 Seconds
• First press - Turns the LED's on in Aurora mode
• Second press - Pauses the Aurora effect and locks in the current lighting color
• Third press - Turns the LED's off
REPLACING THE FILTER
Twist off the humidifier lid
Pull off the filter cover and take out the old filter.
*Note: There is spring located at the bottom of the filter cover. Please put it back in if it should fall out while replacing the filter.
Put the new filter into the filter cover, pop the filter cover back into place and reattach the humidifier lid.
Using the USB Attachments
Remove the USB plug and insert the USB attachment you wish to use by simply inserting the USB end of the attachment into the USB port of the humidifier. Once in place, you can bend the attachment to adjust the angle as needed.
NOTE: The action button does not control the USB port. To stop the fan or to turn off the LED attachment simply remove them from the USB port and put the USB plug back in place.
Caution: Please keep hair and loose clothing away from the fan when in use.
IMPORTANT NOTES:
- Do not use any aroma scented oils or liquids with this unit.
- Do not refill the tank by pouring water through the top atomizing misting port of the humidifier.
- This humidifier is equipped with an Anti-Dry probe which will cause the humidifier to shut down automatically when the water level gets too low.
- The Anti-Dry probe relies on electrical conductivity found in drinking water and since purified water has a very low electrical conductivity levels we do not recommend using purified water.
- Always keep the top USB plug in place when the attachments are not in use.
- To prevent damage to mobile devices we do not recommend you charge them from the humidifier USB port.
- To help extend the life of your humidifier please use filtered water when possible.
- To clean the top Atomizing misting port, gently rub the top surface with an ear swab and a little rubbing alcohol.
Ultrasonic Portable Cool Mist Humidifier with 7 Color LED Lighting (HMDTALL)
$ 29.99
The Macally HMDTALL Ultrasonic Portable Cool Mist Humidifier provides quick relief from dry air making life pleasant for those with colds, allergies and dry skin. The space-saving design, with an easy-to-fill 200mL tank and LED lighting makes it ideal for use at work on your desk, or at home on your nightstand. It disperses a fine mist into the air, and is ultra-quiet making it ideal to have on while you sleep. The humidifier is also equipped “Anti-Dry technology” to prevent dry burning (turns off automatically when the water level is low) and an indicator light to let you know when it's time to refill the water tank.
FEATURES:
- Anti-Dry technology to prevent "dry burning"; Automatically shuts off when the water level becomes low.
- Replaceable water filters to freshen your space with pure, clean moisture
- Runs up to 17 hours (interval mode) on one fill
- Designed to operate quietly for uninterrupted work or sleep
- 2 mist settings (continuous and 3 second interval)
- 7 LED lighting colors to meet your personal preference
BENEFITS:
- Small and compact; Doesn’t take up much space
- Helps relieve dry, itchy skin by ensuring your area remains at a comfortable humidity level.
- Additional filter included
- Large 200mL water tank for up to 17 hours (interval mode) of mist on one fill.
- Portable and easy to use
HOW TO USE/INSTALLATION:
FILLING THE TANK
- Twist off the humidifier lid
- Note: To avoid breaking the clear lid cover, make sure you grasp and twist from the white area. Do not grasp and twist the clear lid cover.
- Fill the tank with water
- Put the lid back on
*Do not use any aroma scented oils or liquids with this unit.
STARTING THE HUMIDIFIER
The humidifier has two missing options:
1. Continuous (default)
2. 3 second intervals
To start the humidifier connect the Micro USB end of the power cable to the back of the humidifier and the USB end to any USB power adapter (adapter not included)
Then press and release the action button to start the humidifier in continuous mode (default). To switch the mister to 3 second interval mode simply press and release the action button a second time and a 3rd time to turn it off.
Press and Release once
• First press - Start's continuous mist mode
• Second press - Changes the misting mode to 3 second intervals
• Third press - Turns the mist off
STARTING THE LED LIGHTING
The humidifier has two LED options:
1. Aurora (default)
2. Solid
To start the Aurora LED lighting effect simply press and hold the action button for 3 seconds until the light turns on. The LED lighting is set to Aurora mode by default.
To pause the Aurora effect and lock in the current lighting color simply press and hold the action button a second time and a 3rd time to turn it off.
Press and Hold for 3 Seconds
• First press - Turns the LED's on in Aurora mode
• Second press - Pauses the Aurora effect and locks in the current lighting color
• Third press - Turns the LED's off
REPLACING THE FILTER
Twist off the humidifier lid
Pull off the filter cover and take out the old filter.
*Note: There is spring located at the bottom of the filter cover. Please put it back in if it should fall out while replacing the filter.
Put the new filter into the filter opening of the humidifier lid, pop the filter cover back into place and reattach the humidifier lid.
IMPORTANT NOTES:
- Do not use any aroma scented oils or liquids with this unit.
- Do not refill the tank by pouring water through the top atomizing misting port of the humidifier.
- This humidifier is equipped with an Anti-Dry probe which will cause the humidifier to shut down automatically when the water level gets too low.
- The Anti-Dry probe relies on electrical conductivity found in drinking water and since purified water has a very low electrical conductivity levels we do not recommend using purified water.
- To help extend the life of your humidifier please use filtered water when possible.
- To clean the top Atomizing misting port, gently rub the top surface with an ear swab and a little rubbing alcohol.
Magnetic Car Dashboard Phone Mount (MDASHMAG3)
$ 29.99
The Macally MDASHMAG3 is a compact car dashboard mount with a magnetic holder for iPhone/smartphone that doesn’t obstruct your view while you drive. It mounts securely on your dashboard and allows you to do hands-free phone calls and use your iPhone/smartphone as a navigator. The holder has a 100% safe and powerful Neodymium magnet and holds any size iPhone/smartphone securely. Works with or without a protective case.
FEATURES:
- Dashboard mount offers the best viewing angle for navigation without blocking your driving view
- Mounts securely on most car dashboards with a textured or curved surface
- Supreme adhesion to dashboard, built to withstand extreme temperatures within -20°C (-4º F) and 80°C (176°F)
- Magnetic holder securely holds any size iPhone/smartphone and most GPS, also while in a protective case
- 100% safe and reliable Neodymium magnet
14" Adjustable Car Suction Holder Mount for iPhone and Smartphone (MGRIP10)
$ 29.99
The Macally MGRIP10 is a car suction mount holder for smartphone that allows you to do hands-free phone calls and use your iPhone/smartphone for navigation. The MGRIP10 not only mounts to the windshield but also to the dashboard, so it doesn’t obstruct your view while you drive. The 14" super long neck brings your smartphone within close reach when mounted to the windshield. In order to increase smartphone stability and visibility on a bumpy road a support stand for the gooseneck is included. It also includes a base disc to mount the suction cup securely to the dashboard. The Macally MGRIP10 fits Apple iPhone XS Max and XR, Samsung Galaxy Note 9, Huawei Mate 20 Pro and P20 Pro, Google Pixel 3, One Plus 6T, LGV40 ThinQ and any other smartphone between 1.8"-4.1" (with/without protective case). Drive safe with the Macally MGRIP10.
FEATURES:
- Supreme suction cup for strong and durable adhesion to dashboard and windshield
- Maximum adhesion to any dashboard with the included suction mount base disc
- Holder securely holds any size iPhone/smartphone and most GPS, also while in a protective case
- 360-degree rotation for the best viewing angle
- 3-level support stand to reduce bouncing of gooseneck and your phone
- Cable clip to keep your phone charging cable organized
- Accessories included: Dashboard base disc, cable clip, support stand.
BENEFITS:
- Safer Driving. Eye-level view & easier reach with 10” flexible neck mount
- Ultimate Stability. Extra cushion stand minimizes bounce and bumps
- 2 - 1 Mounting. Use on the dashboard or windshield with the base disc for strong suction adhesion
Car CD Slot Mount Holder for iPhone/Smartphone (MCDCLIP)
$ 29.99
The Macally MCDCLIP is a car CD slot mount for iPhone/smartphone that doesn’t obstruct your view while you drive. Simply insert the mount in the CD slot of your car and you can do hands-free phone calls and use your iPhone/smartphone as a navigator. The holder securely holds any iPhone/smartphone between 2"~3.5" inches (51~89 mm), even while in a protective case. Drive safe with the Macally MCDCLIP.
FEATURES
- Car CD slot mount offers the best viewing angle for navigation without blocking your driving view
- Easy installation in most CD slots, no tools or adhesive required
- Adjustable clip fits iPhone/smartphone (with/without protective case) between 2"~3.5" inches (51~89 mm
- Soft grip pad and back support to protect your iPhone/smartphone from scratching
- Quick rotation between portrait and landscape view
- Includes MCDCLIP and user guide
BENEFITS
- The CD slot is the perfect place to put your mount with it being out of your driving view but still easily accessible.
- Your perfect viewing angle with 360° rotation and an adjustable ball joint Additional support with adjustable feet
- Simply insert the mount and lock it for installation