- Continue Shopping
- Your Cart is Empty
Home Holder Mounts
Power Strip Cable Organizer Box with Accessory Storage Compartment (CABLEORGBOX)
$ 29.99
The Macally cable box organizer is the perfect solution to keeping your power strips, surge protectors and cables in a neat convenient place. Just set your power strip or surge protector inside the box along with your peripheral power adapters, close the lid and you're done. With all cables neatly concealed and your power strip cable-spaghetti out of sight, the CABLEORGBOX will have the surrounding area looking clean and organized.
FEATURES:
- Clear window storage compartment so you can store small charging adapters, tools, etc.
- Front, side and top cable cutouts to neatly and effectively manage your cables.
- Multiple ventilation slots on the bottom for efficient heat dissipation.
- Dimension: 11.4" x 5.51" x 5.53"
BENEFITS:
- Large inner space: Stores power strips up to 10" and wires perfectly.
- High-Quality material: Made of high-temperature resistant ABS plastic.
- Easy access cable cutouts: Front, side and top outlets.
- Keeps your space organized: Keeps your power strip cable- spaghetti out of sight.
SET UP/INSTALLATION:
- Lift the lid and place your power strip inside the box.
- Connect your power adapters to the power strip and run the cables out through the cable cutouts, then place the lid back on to the cable box.
Black Desktop Charging Stand for Apple Watch (MWATCHSTANDB)
Sold Out - $ 19.99
The Macally MWATCHSTANDB is a stylish and sturdy stand specially designed for the Apple Watch. The stand has a cut out notch to fit your Apple Watch charger perfectly and a trench along the side to channel the charging cable and help you keep your desk/nightstand organized and clean. The Macally MWATCHSTANDB stand has a convenient viewing angle and keeps your Apple Watch within easy reach!
FEATURES:
- Precise cutouts for Apple Watch charger and cable
- Holds your Apple Watch at a convenient viewing angle, providing easy access and visibility
- Stylish and sturdy design
- Compatible with all Apple Watch series
- Works with or without protective cases
BENEFITS:
- Supports Apple Watch (38 and 42 mm), with and without protective case
- Stylish and sturdy design with precise cutouts to fit the original Apple Watch charger/cable
- Holds your Apple Watch at a convenient viewing angle, providing easy access and visibility
- Helps you to keep your desktop/nightstand organized and clean
- *Apple Watch charger not included
SYSTEM REQUIREMENTS:
Any Apple watch, original Apple Watch charger
TECHNICAL SPECS:
- Material: Silicone, Plastic, Nylon, Rubber
- Dimensions: 2.9" x 2.2" x 3.5"
- Weight: Gross: 0.36 lbs
- *Apple watch charger not included
How to use the Macally MWATCHSTANDB
- Remove the bottom rubber plug and pull the Apple Watch charger through it.
- Insert the Apple Watch charger into the circle cutout and run the cable through the cable channel.
- Place the bottom rubber plug back into place and run the cable through the bottom cable channel
- Connect the charger to a USB power adapter (not included)
- Place your Apple Watch on the charger.
Wall Socket Holder For Echo Dot 3rd Gen (MECHOMOUNT3)
$ 29.99
Specially designed for the Echo Dot (3rd gen), the Macally MECHOMOUNT3 wall socket holder enables you to mount your Echo Dot on any outlet in your home or office keeping it away from spill-prone areas and freeing up valuable desk and counter space. With no drilling or screwing required, the MECHOMOUNT3 is easy to use and allows you to mount your Echo Dot right where you need it.
FEATURES
- Secure and Stable hold
- Open access to all ports and buttons
- Easy installation, no tools nor drilling required
- For Echo Dot (3rd Gen)
- Backside cable management to hide excess cable
BENEFITS
- Save space & eliminate cable clutter
- Easy to Install
- Full access to all ports and buttons
- Attractive, decorative design for your home or office
- Mount your Echo Dot on any outlet in your home or office keeping it away from spill-prone areas and freeing up valuable desk and counter space
SPECIFICATIONS
- Dimensions: 4.2" x 2.2" x 7.4"
- Weight: Gross: .35lbs / Net: .20lbs
- Compatibility: Echo Dot 3rd Gen
- Material: ABS plastic
- Package Contents: MECHOMOUNT3 and user guide
INSTALLATION
- Connect the power cable to the Echo dot and place the speaker into the mount
- Snap the back cover into the mount
- Pull the cable downward into any of the cable slots on the back of the mount and wind the excess cable around the cable winder
- When you come close to the end of the cable pull the cable back upwards into any of the other cable slots and insert the power adapter into the upper hole of the holder.
2-in-1 Wall Mount and Countertop Stand for Tablet/Smartphone (STANDWALLMOUNT)
$ 39.99
The Macally 2-in-1 wall mount and countertop stand for tablets and smartphones frees your hands to maximize convenience while following recipes in the kitchen, reading eBooks or simply watching your favorite movies. The stand's expandable holder fits tablets and smartphones from 4.7" to 11" wide and its lightweight design allows for fast and easy setup on a wall, under a kitchen cabinet, in the garage or upright on any tabletop or counter.
FEATURES:
- Multiple setup options: Upright on any countertop, on a wall or under a cabinet with the included sturdy mounting base
- Fully adjustable: Flexible joints and 360 degree cradle rotation to get that perfect viewing angle
- Compact foldable design for easy storage and maximum portability
- Anti-slip rubber padding for maximum stability on a counter or table top
- Compatible with any tablet/smartphone from 4.7" to 11" (12 cm to 28 cm) wide
TECHNICAL SPECIFICATIONS:
- Material: Aluminum, ABS
- Weight: 1.25lbs
- Product Dimensions: 3.35" x 3.07" x 10"
- Compatible with iPads/tablets and any other mobile devices up to 11" inches wide including:
HOW TO USE AS TABLE/COUNTER TOP STAND
- Attach the cradle to the stand.
- Expand the legs.
- Bring up the body and cradle arms.
- Remove pivotal screw caps and tighten as needed.
- Insert tablet/smartphone into cradle
HOW TO USE AS A WALL/CABINET MOUNT
* Before adhering the 3M tape to the surface make sure the drywall inserts are in place where applicable.
- Attach the cradle to the stand.
- Remove the protective film from the 3M tape.
- Place the mounting base on a flat surface (widest opening upward/towards the user) and screw the base into place.
- Fold the legs inwards and place them into the mounting base.
Multipurpose Magnet Mount for Car, Home or Office (MAGME)
$ 19.99
The Macally MAGME is a multipurpose magnet mount that allows you to safely mount your phone, tablet, Echo Dot (2nd gen.) and just about any other object to any flat surface in your home, garage and backyard. The strong Neodymium magnet (50% stronger than regular magnets) holds any object up to 2.5 lbs. The Macally MAGME is very easy to install! Simply remove the protective film from the back of the magnet mount to uncover the strong 3M adhesive, attach the magnet mount onto a flat surface and you can mount any metallic object, such as tools and knives! For non-metallic objects, such as a tablet, smartphone, picture frame, we include two metal plates!
FEATURES:
- Universal multipurpose magnet mount that can be used in the house, car, office and garage
- Safely mount your tablet, phone, Echo Dot and any metallic/non-metallic object to a flat surface
- Neodymium magnet (50% stronger than regular magnets) holds any object up to 2.5 lbs
- Strong 3M adhesive to attach the mount to any flat surface
- Package contents: Magnet mount and 2 metal plates (for non metallic objects)
- Dimensions: 2.12 inches x 0.37 inches x 2.25 inches (LxHxW)
- Contents: 1 x MAGME magnet, 2 x metal plates
HOW TO USE THE MACALLY MAGME:
- Select a location on a flat surface to attach the MAGME magnet mount, clean it with a wet cloth and dry.
- Remove the protective film on the back of the MAGME magnet mount to uncover the adhesive part and attach the mount to the selected location. (For best results, apply enough pressure when you attach the magnet mount to the flat surface and let it sit for 15-20 min before you place any object onto the magnet)
- Place the object on the MAGME mount. When the object is non-metallic, such as a tablet, smartphone, picture frame, etc, attach the metal plate to this object.
MUST BUYS:
- Perfect for hanging tablets, Smartphone, Echo dot, eReader, picture frames, kitchen utensils, tools, decorations and so much more!
- Can be used wherever there is smooth flat surface (Wood, stainless steel, painted steel, aluminum, glass, rigid plastics, porcelain, metal, tiles and more!)
- Highest grade 3M Adhesive backing for extra strength
- Holds most electronic devices
- Compatible with iPads/tablets and any other mobile devices up to 8 inches wide including:
Macally CLIPMOUNTW Clip-on Mount Holder for iPad/tablet, e-reader (CLIPMOUNTW)
$ 29.99
Features:
- iPad/tablet clip-on mount holder for any table, desk or countertop with a thickness up to 45mm (1.75”)
- Adjustable grip fits iPad/tablet, e-reader and other mobile devices between 96 mm (3.5”) and 203 mm (8”) width
- Quick width adjustment and grip release button
- 360-degree rotating cradle holder for the best viewing angle
- Soft rubber cushioned holder grip to protect your device from scratching
- Easy to adjust extra long 279 mm (11”) sturdy arm for optimal viewing
- Flexible design keeps your device in view within easy reach
- No tools required
- Compatible with iPads/tablets and any other mobile devices up to 8 inches wide including: