- Continue Shopping
- Your Cart is Empty
New and Upcoming Products
LED Table Lamp with Qi Wireless Charging and USB Port (LAMPCHARGEQI)
$ 89.99
The Macally LAMPCHARGEQI wireless charging LED table lamp is designed to provide light at your table, desk and nightstand while keeping your mobile devices fully charged.
This clever lamp doubles as a charger and features two separate ways to charge your mobile devices. You can easily charge your Qi-certified smartphone wirelessly (up to 10W) by placing it on the wireless charging pad on the wide base of the lamp. Wide enough to fit any plus size smartphone!
You can charge two devices at the same time at full capacity as it also has a USB port (5V, 2A) on the front side of the base to quickly charge your smartphone, tablet and any other USB powered device.
The lamp has a built-in LED (2700K) with a long lifespan and better LED energy efficiency compared to traditional lighting solutions. This is important as we continue to become increasingly conscious of our ecological footprint. Conveniently, you can dim the light to adjust it to your mood, from ambient light to direct light that brightens up your room!
Fully certified, this wireless charging LED table lamp keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection
FEATURES:
- Conveniently charges two mobile devices at the same time to full capacity
- Dimmable LED
- 5.5" circular base to support just about any sized Smartphone
- USB port (5V, 2A) to quickly charge your smartphone, tablet and any other USB powered device
- Built-in LED (2700K) with a long lifespan and better LED energy efficiency than traditional lighting solutions
- Wireless charging pad to charge any Qi-enabled smartphone, up to 10W power output
- Stylish design to fit on any table, desk, nightstand, sideboard, etc. in any interior
- Includes LAMPCHARGEQI lamp base, lamp shade, AC adapter (100-240V, 50-60 Hz) with 5 ft/150 cm cable and user guide
- Color: Brushed metal / white lamp shade
- Dimensions: 17.25" (H) x 9.25" (W) x 9.25" (L)
- Weight: 2.30lbs
- Cable length: 6 ft
BENEFITS:
- NIGHTSTAND LIGHT CHARGING STATION | With two separate ways to recharge your electronic devices you'll be able to charge your Smartphone, tablet and any other Qi enabled or USB powered device quickly and safely
- 3-IN-1 DESIGN: Enjoy bedside charging and light while using only one outlet and reducing clutter on your nightstand, side table, desk or table
- MULTI-PRONG SAFETY CHECK: Keep your devices safe with surge protection, temperature control, short-circuit protection and over-current protection
- SMART LED BRIGHTNESS MEMORY: the smart LED brightness control allows you to set a desired brightness level and keep it that way when ever the lamp is turned off and on again.
SET UP/INSTALLATION:
- Before installing the LAMPCHARGEQI make sure to remove the plastic film from the lamp shade.
- Unscrew the lamp shade fastener, attach the lamp shade and screw the fastener back into place.
- Plug the power cable into the power port of LAMPCHARGEQI and the AC adapter into a wall outlet.
Wireless Charging
- Center and place your Qi-enabled smartphone on the wireless charging pad. Your smartphone will automatically charge.
- Note: If the battery of your smartphone is completely empty, it may take a few minutes before your smartphone starts charging.
USB Charging
- Connect your smartphone, tablet and any other USB powered device to the USB port (5V/2A) with a USB-Lightning or USB-Micro USB cable (not included)
Control the LED lighting
- Press and release the on/off button to turn the light on/off.
- Press and hold the on/off button to adjust the LED brightness.
Nightstand LED Light with 4 Port USB Charger (LAMPCHARGESQ)
$ 49.99
The Macally LAMPCHARGESQ is a LED light charging station with a stylish wooden bottom finish. The built in LED light is touch controlled and offers a warm soft white light (2700K) -convenient for reading- and three stages of brightness (Dim, Mid and Bright). The 4 USB ports with Smart IC (5V/4.8A) allow you to quickly and efficiently charge your smartphone, tablet or any other USB powered device. Fully certified, it keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection. The Macally LAMPCHARGESQ is the perfect LED light charging station to put on a nightstand in your bedroom, a side table or side board in the living room or on a desk in your study or office.
FEATURES:
- Nightstand LED light with USB charger, ideal to use as a night light and bed side charging station
- 4 Stage touch control: Dim, Mid, Bright, and OFF. Long Tap to turn Off
- 4 USB ports with Smart IC (5V/4.8A) to charge your smartphone, tablet and other USB powered device
- Compatible with a 100-240V AC input
- Includes LAMPCHARGESQ, 6 ft/180 cm AC power cable and user guide
BENEFITS:
- NIGHTSTAND LIGHT CHARGING STATION | With 4 USB ports with Smart IC (4 x 2.4A), you'll be able to charge your smartphone, tablet and and any other USB powered device quickly and safely
- TOUCH CONTROLLED | Simply tap the silver part on the light to turn it on and set the level of brightness to your personal preference.
- 3 LEVELS OF BRIGHTNESS: Create your perfect atmosphere with a 3 stage touch control: dim, mid, bright. Long tap to turn off cozy warm-white lighting (2700K).
- SMALL AND CONVENIENT: Enjoy bedside charging and light while using only one outlet and reducing clutter on your nightstand, side table, desk or table
- MULTI-PRONG SAFETY CHECK: Keep your devices safe with surge protection, temperature control, short-circuit protection and over-current protection
Nightstand/Wall LED Light with 2 port USB Charger (LAMPCHARGEGO)
$ 39.99
The Macally LAMPCHARGEGO is a compact LED light charging station that you can easily place on top of your nightstand, desk, dresser or even hang it on the wall with the included adhesive hook. The LED light is touch controlled and offers a warm soft white light, that is convenient for reading, and three stages of brightness. The 2 USB ports with Smart IC allow you to quickly and efficiently charge your smartphone, tablet or any other USB powered device. Fully certified, it keeps your light and devices safe with surge protection, temperature control, short-circuit protection and over-current protection. The Macally LAMPCHARGEGO is the perfect LED light charging station to put on the nightstand or desk in your study and even hang on the wall.
FEATURES:
- Nightstand and wall* LED light with USB charger, ideal to use as a night light and bed side charging station
- 4 Stage touch control: Dim, Mid, Bright, and OFF. Long Tap to turn Off
- 2 USB ports with Smart IC (5V/4.8A) to charge your smartphone, tablet and other USB powered device
- Compatible with a 100-240V AC input
- Non slip rubberized base keeps the LAMPCHARGEGO in place
- Includes LAMPCHARGEGO, adhesive hook, 6 ft/180 cm AC power cable and user guide
* Adhesive hook is included. The light also has a hole on the back to hang it on the wall with a metal hook (not included)
BENEFITS:
- LED LIGHT CHARGING STATION | With 2 USB ports with Smart IC (2 x 2.4A), you'll be able to charge your smartphone, tablet and any other USB powered device quickly and safely
- TOUCH CONTROLLED | Simply tap the silver part on the light to turn it on and set the level of brightness to your personal preference
- 3 LEVELS OF BRIGHTNESS | Create your perfect atmosphere with a 3 stage touch control: dim, mid, bright and off. Long tap to turn off cozy warm-white lighting (2700K)
- SMALL AND CONVENIENT: Place it easily on the nightstand or hang on the wall (with the included adhesive plastic hook) and enjoy bed side light/charging while using only one outlet. No object or cable clutter on your bedside or desk
- MULTI-PRONG SAFETY CHECK: Keep your devices safe with surge protection, temperature control, short-circuit protection and over-current protection
Rechargeable and Portable LED Night Light (KIDSNITELITE)
$ 39.99
The Macally KIDSNITELITE is a portable LED light that you can take with you within the house at night to feed your baby, check on your kids or go to the restroom without the need to turn on a bright light. Easy to use, simply press the button to change the brightness (dim-mid-bright-off) and press/hold to adjust between warm white and clear white, and vice versa. The built-in 2500 mah Li-battery lasts for up to 6 hours at the brightest and 200 hours at the dimmest. It’s solid and sturdy without loose parts to ensure your child’s and your own safety. The Macally KIDSNITELITE comes with 1 adhesive hook to hang the light on the wall or bed, wrist lanyard to conveniently carry it with you or hang above the crib, a 3.3'/100 cm USB charging cable and user guide.
FEATURES:
- Portable LED light, ideal to use at night to feed your baby, check on your kids or go the restroom without the need to turn on a bright light
- Easy to operate: Dim, Mid, Bright, and OFF. Hold to change from cool white to warm white, and vice versa
- Solid and sturdy design. Non-toxic materials, no loose parts for maximum child safety
- Built-in 2500 mAh Li-battery, lasts for up to 6 hours at the brightest and 200 hours at the dimmest
- Built with ultra cool LED's. Cool to the touch.
- Contents: Includes KIDSNITELITE, 1 adhesive hook, wrist lanyard, 3.3' USB charging cable and user guide
BENEFITS:
- Solid design without loose parts and ultra cool LEDs for maximum safety and comfort
- Built-in LEDs. Light is cool to the touch
ADJUST BRIGHTNESS:
- Press and release: Cycles through the multiple brightness levels (Dim, Mid, Bright, Off)
- Press and hold: Switches between the two lighting modes (Warm and Cool white)
- Quick double press: Turns the light off immediately
HOW TO CHARGE:
- To charge the night light, simply connect the Micro USB end of the power cable to the back of the night light and the USB-A end to any USB-A power adapter (adapter not included).
- Note: While charging, the battery status LED will blink blue and then turn to solid blue when fully charged. When battery level is low, the battery status LED will turn red.
Black Desktop Charging Stand for Apple Watch (MWATCHSTANDB)
$ 19.99
The Macally MWATCHSTANDB is a stylish and sturdy stand specially designed for the Apple Watch. The stand has a cut out notch to fit your Apple Watch charger perfectly and a trench along the side to channel the charging cable and help you keep your desk/nightstand organized and clean. The Macally MWATCHSTANDB stand has a convenient viewing angle and keeps your Apple Watch within easy reach!
FEATURES:
- Precise cutouts for Apple Watch charger and cable
- Holds your Apple Watch at a convenient viewing angle, providing easy access and visibility
- Stylish and sturdy design
- Compatible with all Apple Watch series
- Works with or without protective cases
BENEFITS:
- Supports Apple Watch (38 and 42 mm), with and without protective case
- Stylish and sturdy design with precise cutouts to fit the original Apple Watch charger/cable
- Holds your Apple Watch at a convenient viewing angle, providing easy access and visibility
- Helps you to keep your desktop/nightstand organized and clean
- *Apple Watch charger not included
SYSTEM REQUIREMENTS:
Any Apple watch, original Apple Watch charger
TECHNICAL SPECS:
- Material: Silicone, Plastic, Nylon, Rubber
- Dimensions: 2.9" x 2.2" x 3.5"
- Weight: Gross: 0.36 lbs
- *Apple watch charger not included
How to use the Macally MWATCHSTANDB
- Remove the bottom rubber plug and pull the Apple Watch charger through it.
- Insert the Apple Watch charger into the circle cutout and run the cable through the cable channel.
- Place the bottom rubber plug back into place and run the cable through the bottom cable channel
- Connect the charger to a USB power adapter (not included)
- Place your Apple Watch on the charger.
Power Strip Cable Organizer Box with Accessory Storage Compartment (CABLEORGBOX)
$ 29.99
The Macally cable box organizer is the perfect solution to keeping your power strips, surge protectors and cables in a neat convenient place. Just set your power strip or surge protector inside the box along with your peripheral power adapters, close the lid and you're done. With all cables neatly concealed and your power strip cable-spaghetti out of sight, the CABLEORGBOX will have the surrounding area looking clean and organized.
FEATURES:
- Clear window storage compartment so you can store small charging adapters, tools, etc.
- Front, side and top cable cutouts to neatly and effectively manage your cables.
- Multiple ventilation slots on the bottom for efficient heat dissipation.
- Dimension: 11.4" x 5.51" x 5.53"
BENEFITS:
- Large inner space: Stores power strips up to 10" and wires perfectly.
- High-Quality material: Made of high-temperature resistant ABS plastic.
- Easy access cable cutouts: Front, side and top outlets.
- Keeps your space organized: Keeps your power strip cable- spaghetti out of sight.
SET UP/INSTALLATION:
- Lift the lid and place your power strip inside the box.
- Connect your power adapters to the power strip and run the cables out through the cable cutouts, then place the lid back on to the cable box.
Black Dual Position Car Seat Headrest Mount (HRMOUNTPROB)
$ 29.99
Features
- Mounts your iPad/tablet securely to the car's headrest
- Supports headrest posts between 2"/5 cm and 7.2"/18.4 cm wide
- Strong aluminum shaft can be extended to place cradle holder between the two front seats
- Swivel ball-head to accommodate optimal viewing angles
- Cradle fits iPad/tablet and any other mobile device between 5"/12.7 cm to 10"/25.4 cm wide
- Soft grip pad and back support to protect your iPad/tablet from scratching
- Quick rotation between portrait and landscape view
- Quick installation and dismounting, no tools required
- Compatible with iPads/tablets and any other mobile devices up to 8 inches wide including:
Car Vent Mount Holder with Wireless Qi Certified Charging for Smartphones (MVENTQI)
$ 59.99
The Macally MVENTQI works with most horizontal and vertical air vents, a built-in USB port or USB car charger and any Qi enabled smartphone between between 2.1" ~ 4.7", like iPhone XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9 and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35 ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc.
FEATURES:
- Optimized for wireless charging of all Qi enabled smartphones with a width between 2.1" ~ 4.7"
- Adjustable bottom phone stabilizer to correctly align your Qi enabled Smartphone charging coil position
- Up to a 40% faster charge than standard Qi wireless chargers (only applicable to wireless fast charge enabled smartphones) **Minimum 9V 2A Quick Charge adapter required
- Built in FOD (Foreign Object Detection) to prevent overheating and damage to your Qi enabled device.
- Car air vent mount holder offers the best viewing angle for navigation without blocking your driving view
- Patented vent clamp to mount your mobile device securely on most horizontal and vertical air vents
BENEFITS:
- Charges your Smartphone up to a 40% faster than standard Qi wireless chargers (requires a wireless fast charge enabled device)
- Keep your phone in one simple, easy to reach place while you drive
- Swivel ball joint to accommodate optimal viewing angles and 360° rotation
- Patented vent clamp to mount your mobile device securely on most horizontal and vertical air vents
SET UP/INSTALLATION:
- Find a visible and reachable location on any of your cars air vents to attach the phone holder.
- Insert the clamp into the air vent and tighten it securely into place by turning the screw handle clockwise.
- Press the support stand release buttons and swivel the stand until it sits on the surface of your vehicle to support the mount.
- Connect the USB-C end of the charging cable to the cradle and the other end into the USB-A port of your car or USB car charger.
- Press the holder grip and foot support release buttons on the back of the cradle to expand the arms and pull down the foot support.
- Place your smartphone in the holder and align the center of your smartphone with the triangle marks on the grips for best Qi charging efficieny.
- Push the foot support upward until the bottom of your smartphone rests on it.
- Press both holder grips inward until they hold the smartphone firmly. Your smaatphone will automatically start to charge.
- To obtain the most comfortable smartphone viewing positioning, simply bend the neck till you reach the desired viewing position.
- To switch between vertical and horizontal viewing angles, simply rotate the holder as needed.
NOTES:
Do not place any metallic objects on the Qi charger
Before charging, please remove any protective case with a ring, popsocket, credit card holder and any metal plate from your smartphone. Failing to do so can cause serious damage to your Smartphone and charger!
Wireless Qi Certified Charging Cup Holder Mount with Adjustable Neck for Smartphones (MCUPXLQI)
$ 59.99
Macally MCUPXLQI Car Cup Holder Mount With 4" Long Flexible Neck and Wireless Qi Charger for iPhone XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9 and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35 ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc.
FEATURES:
- Optimized for wireless charging of all Qi enabled smartphones with a width between 2.1" ~ 4.7".
- Adjustable bottom phone stabilizer to correctly align your Qi enabled Smartphone charging coil position.
- Up to a 40% faster charge than standard Qi wireless chargers (only applicable to wireless fast charge enabled smartphones) **Minimum 9V 2A Quick Charge adapter required
- Built in FOD (Foreign Object Detection) to prevent overheating and damage to your Qi enabled device.
- 4"/10 cm flexible neck and 360° rotatable holder to achieve an optimal viewing angle
BENEFITS:
- Charges your Smartphone up to a 40% faster than standard Qi wireless chargers (requires a wireless fast charge enabled device)
- Keep your phone in one simple, easy to reach place while you drive
- Universally compatible with all Qi enabled Smartphones with a width between 2.1" ~ 4.7"
- Rubber pad/spacers included to accommodate larger cup holders
SET UP/INSTALLATION:
- Attach the holder to the neck.
- Place the base into your car's cup holder and twist the screw knob until you reach a snug fit. Please be careful not to over tighten the screw knob.
- Connect the USB-C end of the charging cable to the cradle and the other end into the USB-A port of your car or USB car charger (not included).
- Press the holder grip/foot support release buttons on the back of the cradle to expand the arms and pull down the foot support.
- Use the included smartphone placement cards to adjust the foot support and properly align your smartphone's charging coil position.
- Place your smartphone in the holder and squeeze both grips inward until it holds the smartphone firmly. Your smartphone will automatically start to charge.
- To obtain the most comfortable smartphone viewing positioning, simply bend the neck till you reach the desired viewing position.
- To switch between vertical and horizontal viewing angles, simply rotate the holder as needed.
NOTES:
- Do not place any metallic objects on the Qi charger
- Before charging, please remove any protective case with a ring, popsocket, credit card holder and any metal plate from your smartphone. Failing to do so can cause serious damage to your Smartphone and charger!
Deluxe Full Size Wireless RF Keyboard for Windows PC (RFDDKEY)
Sold Out - $ 29.99
The Macally RFDDKEY is a 2.4GHz wireless RF keyboard specially designed for PC. 104-key full size with a standard layout, economic yet ergonomic for a comfortable and efficient typing experience. Eight additional multimedia hot keys and numeric keypad further increase efficiency and productivity.
The Macally RFDDKEY is very easy to use. Simply plug the RF receiver dongle into the USB port of your computer and you are ready to go! Also, no software is required!
FEATURES:
- Full size and thin keys for a comfortable and efficient typing experience
- 8 convenient multimedia hot keys for one-touch control of PC applications and enhanced productivity
- 17-key numeric keypad to quickly and efficiently enter long sequences of numbers
- LED indicators for Num Lock, Caps Lock and low battery
- Plug and Play via USB (No software required)
- Stable 2.4GHz wireless RF technology
- Concave key cap design for faster and a more comfortable typing experience
- Uncluttered cable free workspace
- One "AAA" battery included
- System requirements: USB-A port; Windows 7/8/10 or later
Deluxe Wireless RF Keyboard and Mouse Combo for Windows PC (RFDDKEYCOMBO)
$ 34.99
The Macally RFDDKEYCOMBO is a wireless RF keyboard specially designed for PC, and bundled with a wireless RF optical mouse. 112-key full size with a standard layout, ergonomic and concave key cap design for a comfortable and efficient typing experience. 8 hot keys and numeric keyboard further increase efficiency and productivity.
The Macally RFDDKEYCOMBO is very easy to use. Simply plug the USB RF dongle into any USB port of your computer and you are ready to go! Also, no software is required!
Thin (only 0.79"), compact, and versatile, the Macally RFDDKEYCOMBO is the perfect companion for your PC!
FEATURES:
112-KEY FULL SIZE WIRELESS RF KEYBOARD
- Full size and concave keys for a comfortable and efficient typing experience
- 8 hot keys for one-touch control of PC applications and enhanced productivity
- 17-key numeric keypad to quickly and efficiently enter long sequences of numbers
- LED indicators for Num Lock, Caps Lock and low battery
- Plug and Play via USB (No software required)
- Stable 2.4GHz wireless RF technology
- Concave key cap design for faster and a more comfortable typing experience
- Uncluttered cable free workspace
- One "AAA" battery included
WIRELESS RF OPTICAL MOUSE
- 800/1200/1600 dpi precision optical sensor for precise and smooth control
- 3 buttons and scroll wheel
- Ergonomic and ambidextrous design for maximum comfort
- Stable 2.4GHz wireless RF mouse technology
- One "AA" battery included
- On/Off switch for energy saving
6 Button Wireless Optical RF Mouse for PC (RFGRIPMOUSE)
$ 24.99
Be more productive with the Macally RFGRIPMOUSE. Its contoured shape makes extended use more comfortable while the 6-button design allows you to scroll-n-click your way through your favorite websites and applications. This wireless mouse utilizes 2.4GHz wireless RF technology for a fast and stable connection and is optimized for comfort as you work.
FEATURES:
- Optical sensor can reach up to 1600 dpi for precise and smooth movement
- Contoured side for a comfortable grip
- 2.4GHz wireless RF technology for a fast and stable connection
- Back and forward side buttons *
- Clickable scroll wheel
- Smart sleep mode to help conserve battery life up to 3-6 months. Goes to sleep after 10 minutes of inactivity
- Contents: RFGRIPMOUSE, USB dongle receiver, 2 AAA batteries and user guide
* Windows only
BENEFITS:
- Comfortable contoured design for right-handed users: Makes extended use more comfortable
- 6-button design: For maximum productivity
- Wireless Connection: Simply plug and play by inserting the unobtrusive RF wireless receiver into any laptop or computer USB 2.0/3.0 port
- Precise optical sensor and instantly changeable DPI levels
SET UP/INSTALLATION:
- The Macally RFGRIPMOUSE does not require a special driver and will automatically be recognized by the computer. Simply follow the steps below and you are ready to go!
- Remove the battery compartment cover.
- Remove the USB dongle receiver and insert it into any available USB port on your computer.
- Insert the 2 AAA batteries (included), reattach the battery compartment cover and flip the on/off switch to the on position.
- You can configure the mouse buttons, pointer, pointer options and wheel in the Hardware/Control Panel section of your computers settings and preferences.
Car Cup Holder Mount with Gravity Phone Holder (MCUPGRAVITY)
Sold Out - $ 29.99
The Macally MCUPGRAVITY is designed to allow one hand operation to mount your phone onto your car’s cup holder. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The soft cushioning on the holder provides a secure grip and protects your phone from scratches. The 6,3 cm (2,5") adjustable neck and 360-degree rotatable holder bring your phone within reach and offer the best viewing angle. Finally, the expendable base fits car cup holders with a width of 64 mm (2.5") to 101 mm (4"). The Macally MCUPGRAVITY is ideal for handsfree phone calls and for navigation without obstructing your view while you drive!
FEATURES:
- Fits any phone with the bulkiest case between 2.36" and 3.39"/60 mm and 86 mm width, and up to 13 mm/0.5" thickness
- Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone
- Button to extend the cradle bottom support to accommodate taller phones
- Soft grip pad and back support to protect your phone from scratches
- Flexible neck and 360° rotatable holder to achieve an optimal viewing angle
- Expandable base to fit car cup holders with a width of 2.5" to 4"
BENEFITS:
- Ideal single handed operation. Free to use your other hand to grab keys, bags or drink when entering or exiting vehicle.
- Flexible design keeps your device within reach
- For iPhone/smartphone, also while in a case
- Push button to extend the bottom support
- Adjustable base for a secure fit in most cup holders
Car Vent Mount with Gravity Phone Holder (MVENTGRAVITY)
Sold Out - $ 29.99
The Macally MVENTGRAVITY is designed to allow one hand operation to mount your phone onto your car’s air vent. Simply place the phone in the cradle and the grips will automatically close. To remove the phone is just as easy. Press the button to release the grips and remove your phone. The cradle grips open between 60 mm (2.36") and 86 mm (3.39") width to support a wide range of phones, with or without protection cases. The vent clamp can be easily and securely tightened in the air vent with the screw handle on the top. The supporting stand offloads the stress from the air vent and ensures a wide open vent for optimal air flow. The Macally MVENTGRAVITY offers many viewing angles and is perfect for navigation without obstructing your view while you drive!
FEATURES:
- Fits any phone with the bulkiest case between 2.36" and 3.39" width, and up to 0.5" thickness
- Spring loaded cradle grips for convenient one hand operation to easily mount and remove your phone
- Button to extend the cradle bottom support to accommodate taller phones
- Soft grip pad and back support to protect your mobile device from scratching
- Adjustable clamp to mount your phone securely on most standard horizontal and vertical air vents
- Swivel ball-head to accommodate optimal viewing angles
- Adjustable supporting stand for added mounting stability
- Quick rotation between portrait and landscape view
BENEFITS:
- Clampmount with tightening screw and supporting stand
- For iPhone/smartphone, also while in a case
- 360º rotatable viewing angle perfect for navigation use
- Wide viewing angles for driver or passenger
HOW TO USE:
Important note: Do NOT mount/unmount/adjust the Macally car phone mount while driving your car. Please pull over and come to a stop where it is safe to do so and does not impede traffic, and only then you can mount/unmount/adjust the Macally car phone mount.
- Install the cradle on top of the base and slide down until it clicks and locks.
- Find the desired location on the air vent in the dashboard of your car.
- Insert the clamp to the air vent and tighten the screw handle clockwise to lock it securely into place.
- Press the supporting stand release buttons and swivel the stand until it seats on a surface to support the mount.
- Place your phone on the cradle bottom support and push it downward to open the cradle grips.
- When the cradle grips open wide enough, lay your phone onto the cradle back support.
- Lift up your phone just a little bit to retract and fully close the grips to hold your phone securely.
- If you have a large size phone (6.5-inch or longer), you may want to extend the cradle bottom support. In order to do this, press the release button and pull down the cradle bottom support to the desired length.
- To adjust the viewing angle of the cradle, slightly unscrew the ball-head counterclockwise to loosen up the ball-head.
- Once you have found the desired viewing angle, turn the ball-head screw cap clockwise to tie the ball-head and cradle into place.
- To change between vertical and horizontal views, just hold and turn the cradle with your phone.
- To remove your phone from the cradle, press it downward and the grips will open.